Does this look right

[Grumpy2869]

2021/01/29 20:52:19.471|Info|Attempt to execute C:\hpswsetup\sp111389\install.cmd...

C:\hpswsetup\sp111389>REM The following is required in all INSTALL.CMD files

C:\hpswsetup\sp111389>if exist c:\system.sav\util\SetVariables.cmd Call c:\system.sav\util\SetVariables.cmd

C:\hpswsetup\sp111389>Set block=C:\hpswsetup\sp111389\

C:\hpswsetup\sp111389>CD /D "C:\hpswsetup\sp111389\"

C:\hpswsetup\sp111389>REM Remove the REM from the next line if your component does not support Silent Install (Application Recovery)

C:\hpswsetup\sp111389>REM Erase /F /Q *.CVA

C:\hpswsetup\sp111389>REM Add the command-line to have your component to be installed properly

C:\hpswsetup\sp111389>Pushd src

C:\hpswsetup\sp111389\src>CALL "InstallDriver.cmd"
**************************************************************
*** Batch Install Realtek Wireless LAN Driver
***
*** Please wait a moment

The operation completed successfully.
----- Fri 01/29/2021 20:52:20.18 ----- Installation BEGIN
Microsoft PnP Utility

Adding driver package: netrtwlane.inf
Driver package added successfully. (Already exists in the system)
Published Name: oem65.inf
Driver package is up-to-date on device: PCI\VEN_10EC&DEV_C822&SUBSYS_85F7103C&REV_00\00E04CFFFEC8220100

Total driver packages: 1
Added driver packages: 0
Microsoft PnP Utility

Adding driver package: netrtwlane02.inf
Driver package added successfully. (Already exists in the system)
Published Name: oem26.inf

Total driver packages: 1
Added driver packages: 1
8822CE is HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4d36e972-e325-11ce-bfc1-08002be10318}\0001
PCI\VEN_10EC&DEV_C822&SUBSYS_85F7103C&REV_00\00E04CFFFEC8220100: Disabled
1 device(s) disabled.
Parameter is []
PCI\VEN_10EC&DEV_C822&SUBSYS_85F7103C&REV_00\00E04CFFFEC8220100: Enabled
1 device(s) are enabled.
----- Fri 01/29/2021 20:52:26.07 ----- Installation END

**************************************************************
*** Driver Install Finished

2021/02/21 01:02:17.818|Info|Attempt to execute C:\hpswsetup\sp111389\install.cmd...

C:\hpswsetup\sp111389>REM The following is required in all INSTALL.CMD files

C:\hpswsetup\sp111389>if exist c:\system.sav\util\SetVariables.cmd Call c:\system.sav\util\SetVariables.cmd

C:\hpswsetup\sp111389>Set block=C:\hpswsetup\sp111389\

C:\hpswsetup\sp111389>CD /D "C:\hpswsetup\sp111389\"

C:\hpswsetup\sp111389>REM Remove the REM from the next line if your component does not support Silent Install (Application Recovery)

C:\hpswsetup\sp111389>REM Erase /F /Q *.CVA

C:\hpswsetup\sp111389>REM Add the command-line to have your component to be installed properly

C:\hpswsetup\sp111389>Pushd src

C:\hpswsetup\sp111389\src>CALL "InstallDriver.cmd"
Access is denied.

C:\hpswsetup\sp111389\src>Popd

C:\hpswsetup\sp111389>REM Erase failure flag file when install succeeded. Most applications return zero to indicate success.

C:\hpswsetup\sp111389>ECHO 1 1>>FAILURE.FLG

C:\hpswsetup\sp111389>IF 1 EQU 0 ERASE /F /Q FAILURE.FLG

C:\hpswsetup\sp111389>IF 1 EQU 3010 ERASE /F /Q FAILURE.FLG

C:\hpswsetup\sp111389>EXIT /B 1