cancel
Showing results for 
Search instead for 
Did you mean: 
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
boycat
New member
1 0 0 0
Message 1 of 2
119
Flag Post

Copied document will not print

HP Recommended
HP Envy 4520
Microsoft Windows 10 (64-bit)

 

Copied document will not print on my HP Envy 4520.  It will print documents sent to the printer, but will not print a document when I copy it.

0 Kudos
1 REPLY 1
Jeet_singh
Retired
Retired
21,068 21,032 1,398 2,343
Message 2 of 2
Flag Post
HP Recommended

Hi @boycat,

 

Thank you for showing your interest in HP Support Forums. It is a great place to find the help you need, from other users, HP experts, and other support personnel. For you to have the best experience on the HP forum, you could also visit our HP Forums Guide for the First Time Here? Learn How to Post and More.

 

I see from the post that you are having issues with making a copy on your HP printer. Don't worry as I have a few suggestions which should help you resolve your concern,

 

To provide you with an accurate solution, I'll need a few more details:

Does that Scanner bulb light up?

Does the scanner bar move when you open the lid & press the copy button?

Have you checked if the unit can make a standalone copy? If ‘YES’ then it means the scan hardware of the All-in-One works fine.

 

In the meantime, let's start off by performing a Hard reset on the printer and make sure that the printer is connected directly to the wall outlet and not to the surge protector.

Remove all the ink cartridges and then try to perform a hard reset on the printer.

With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.

Remove USB cable, if present.

Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.

Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord and then plug back the power cord to the printer.

Turn on the printer and wait till warm-up period finishes and the printer is idle.

Now insert the ink cartridges and then try to print a test page and check if it works.

 

Let’s first try and make a “photocopy” to determine whether the issue is with the printer or not. Place a document on the scanner glass and choose “Copy” option. If the printer is making a good copy, then the printer hardware is fine.

 

If you’re running Windows, I would start by checking the installed printer software by downloading and running the HP Print and Scan Doctor. This tool can diagnose and fix many printing and printer software related issues. Please use this link to help you with that information: http://hp.care/2biN2XE 

 

If your printer connected wirelessly, make sure to temporary connect the device with USB and then follow the link to check for the latest firmware update and install it, using this link: http://ftp.hp.com/pub/softlib/software13/printers/EN4520_R1617B.exe

 

Please reply to this post with the details for further assistance.

 

Eagerly waiting for your response!

I hope you have a good day ahead,

And Feel free to ask your queries as this forum has some of the best people in the world

Available and ready to help.

Regards,

Jeet_Singh
I am an HP Employee

0 Kudos
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation