cancel
Showing results for 
Search instead for 
Did you mean: 
This topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
Highlighted
New member
2 0 0 0
Message 1 of 14
7,101
Flag Post
HP Recommended

error code 0xc18a0001

please help i just installed new cartirdges in hp  c5180 all-in-one printer like i have before but i got a error code and it will not clear by restarting printer ?

0 Kudos
13 REPLIES 13
Level 5
Level 5
172 169 8 69
Message 2 of 14
7,062
Flag Post
HP Recommended

error code 0xc18a0001

sent you a personal email

I am an HP employee, Printer/All-in-One Expert.
Give Kudos to say "thanks" by clicking on the "thumps Up icon"
Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
Highlighted
New member
2 2 0 0
Message 3 of 14
7,016
Flag Post
HP Recommended

error code 0xc18a0001

So what is the answer to this problem?  I have the same one.

0 Kudos
Highlighted
New member
1 1 0 0
Message 4 of 14
6,994
Flag Post
HP Recommended

error code 0xc18a0001

I also have the same problem -- what's the solution?? -Joe
0 Kudos
Highlighted
Level 5
Level 5
172 169 8 69
Message 5 of 14
6,981
Flag Post
HP Recommended

error code 0xc18a0001

Hi,

 

I can help you to solve your problem, just follow the next steps:

 

1.- Get the unit into the “Support Menu” by following the steps below:

A.- Press and hold the “left arrow” key.

B.- Press the “Setup” key and release both keys.

Display should say “Enter Special Key Combo”

C.- Press and release the “OK” button

 

Once in the menu, follow the next steps:

2.- Press and release the right arrow button twice.

3.- Display should say “System Configuration Menu”.

4.- Press and release the “OK” button.
5.-Display should say “Hardware failure status”. If not there already, press Arrow Key over to “Hardware failure status”,
6.-Press and release the “OK” button.
7.-Display should say “Hardware failure status: Clear. Press OK to clear”. 
8.-Press and release the “OK” Button. The message changes to “Hardware failure status Cleared. Press Cancel to continue”.
9.-Press and release the “CANCEL” button as many times until the “Welcome to Photosmart Express” window appears.
10.-Turn the unit on and then off, continue with the installation/setup of the unit.

 

Let me know if this solved your problem.

 

I am an HP employee, Printer/All-in-One Expert.
Give Kudos to say "thanks" by clicking on the "thumps Up icon"
Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
Highlighted
New member
2 2 0 0
Message 6 of 14
6,376
Flag Post
HP Recommended

error code 0xc18a0001

I tried the recent directions posted, printed one thing and the error starts all over again. Any other way around this? Thanks.

0 Kudos
Highlighted
Level 5
Level 5
172 169 8 69
Message 7 of 14
6,373
Flag Post
HP Recommended

error code 0xc18a0001

Hi, if the above steps can not solve your problem, your printer may have another problem and it may need to be replaced.  you may contact HP service in your country to see what your options are to get a new printer.

 

 

I am an HP employee, Printer/All-in-One Expert.
Give Kudos to say "thanks" by clicking on the "thumps Up icon"
Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
0 Kudos
Highlighted
New member
2 2 0 0
Message 8 of 14
6,354
Flag Post
HP Recommended

error code 0xc18a0001

Ok. Yes, I just spoke with my HP dealer today. He said he wants to try a different cartridge, but failing that, he said it may boil down to a replacement as well. Thanks for your help and replies. :indifferent: The bottom line was that all we could really do is try different things.

0 Kudos
Highlighted
New member
2 2 0 0
Message 9 of 14
5,673
Flag Post
HP Recommended

error code 0xc18a0001

installed ink cartridges error code 0xc18a0001 appears
0 Kudos
Highlighted
Retired
Retired
4,704 5,044 255 602
Message 10 of 14
5,668
Flag Post
HP Recommended

error code 0xc18a0001

Hi mbrownthing,

 

I understand you're receiving an error code after installing new ink cartridges. I'm sorry to hear you're having this issue but I will do my best to help.

 

Which printer is it you have? You can try this generic document until I know which printer you have, but once I know I will see if there is a more specific document you can follow.

 

Have a great day!


Click the “Kudos Thumbs Up" on the right to thank me for responding! 🙂

Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster!


**MissTeriLynn**
I work on behalf of HP
0 Kudos
This topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation