cancel
Showing results for 
Search instead for 
Did you mean: 

Note on archived topics.

This topic has been archived. Information and links in this thread may no longer be available or relevant.
If you have a question create a new topic by clicking here and select the appropriate board.
TEAM-NTK
New member
1 0 0 0
Message 1 of 2
645
Flag Post
HP Recommended

HP IMC Deployment Guide doesn't work properly

IMC
Other

Hello Community,

 

when I create a deployment Task on iMC PLAT 7.2(E0403P04) with the Deployment Guide and then under Deploy Device Configuration, select the affected Devices and appropiate Template with the Variable ${ipnr} .

Exactly an CLI Script with

 

conf t

int vlan 4

ip address ${ipnr} 255.255.252.0

exit

 

But when the Task is running, it only fills in

(vlan-4)#

ip address 255.255.252.0  

 

Why didnt the Script fill in the Variable ${ipnr} as descripted in the documentation - could someone help me on that issue

 

best regards

 

team-ntk

 

 

 

 

0 Kudos
1 REPLY 1
Dennis_Handly
Level 7
1,516 1,504 29 60
Message 2 of 2
541
Flag Post
HP Recommended

HP IMC Deployment Guide doesn't work properly

This is the wrong company for Servers, Storage, Networking and Software. Please use the Hewlett Packard Enterprise Community:
https://community.hpe.com/t5/IMC/bd-p/network-management-a-series-forum

0 Kudos

Note on archived topics.

This topic has been archived. Information and links in this thread may no longer be available or relevant.
If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation