Screen blue

[Lillian65]

Keep getting bad system Config 

[Kumar0307]

@Lillian65, Welcome to the HP Support Community!

It seems like a blue screen error on the computer. Let us try these steps:

Performing a Hard Reset

Many startup errors and other problems can be resolved by decreasing the amount of power stored in hardware components. Decreasing stored power is sometimes referred to as a "Hard Reset". Use the following steps to perform a hard reset on a computer:

1. If Windows is open, click Start and then Shutdown.

   If Windows is not open and the computer has power, press and hold the power button on the computer until the computer shuts off.

2. With the power off, disconnect the power cord from the back of the computer.

3. With the power off and the power cord disconnected, press the power button on the computer for 5 seconds. The power light indicator on or near the power button might turn on briefly but then go out.

4. Reconnect the power cord and turn on the power.

Run a System extensive test as well as an extensive test on the Hard drive from F2 (Please capture the failure ID for further assistance).

Share the result in your next post.

Hope this helps! Keep me posted. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Have a great day!