Highlighted
mr_cg Tutor
Tutor
14 1 1
Message 1 of 6
1,191
Flag Post
HP Recommended

Solved!

HP Capture Stage supported from HP Structured Light Scanner v5 ???

HP 3d Capture Stage & HP Structured Light 3d Scanner
Microsoft Windows 10 (64-bit)
Is HP 3d Capture Stage turntable supported from HP SLS 3d Scanner (David 5)?
I saw youtube video with HP SLS (David 5) 3d scanner on HP Sprout using the HP 3d Capture Stage turntable for automatic scanning.
Is it officially supported?
5 REPLIES
Grad Student
Grad Student
317 19 31
Message 2 of 6
1,184
Flag Post
HP Recommended

Solved!

HP Capture Stage supported from HP Structured Light Scanner v5 ???

Hello,

 

capture stage is not supported by SLS systems. It works with HP 3D Scanning software and Sprout only. HP 3D Automatic turntable and old DAVID turntable are both working with original DAVID and HP 3D Pro S2 and S3 systems and Sprout.

I am an HP Employee

Original David Team Member
Reply
0 Kudos
mr_cg Tutor
Tutor
14 1 1
Message 3 of 6
1,175
Flag Post
HP Recommended

Solved!

HP Capture Stage supported from HP Structured Light Scanner v5 ???

Thanks for the clear and quick answer.
Reply
0 Kudos
amary3d Honor Student
Honor Student
2 0 1
Message 4 of 6
616
Flag Post
HP Recommended

Solved!

HP Capture Stage supported from HP Structured Light Scanner v5 ???

I'm confused, since here is a review and video that clearly shows the HP 3D Scan Pro 5.2.0 (Ex DAVID v5) software controlling the HP Capture Stage:

 

sprout-pro-g2-3d-scanning-turntable-tilted-mode.x92699.jpg

 

https://youtu.be/pIep0vaWcZI

 

Furthermore, it is also clear from the screenshot in this same review that this is the exact same v5 software that is also used for the HP & DAVID SLS scanning systems:

 

setup

 

https://3dscanexpert.com/hp-sprout-pro-g2-3d-scanning-review/

 

Are you saying that the HP 3d Scan Pro v5 software actually does support the HP Capture Stage.

BUT that this already-built-in functionality has been deliberately disabled when using this software with an SLS system — simply to force those customers to puchase the much-more-expensive HP Automatic Turntable instead???

Reply
0 Kudos
SteelCityDodge Honor Student
Honor Student
2 0 0
Message 5 of 6
539
Flag Post
HP Recommended

Solved!

HP Capture Stage supported from HP Structured Light Scanner v5 ???

Hi 

To clarify, if you are using the Scan Pro SW on Sprout (pre installed) then the capture stage will work with Sprout and the Scan Pro software.

I don't believe the HP 3D Automatic Turntable Pro, the accessory for the dedicated 3D scan solution will work with Sprout if you are using the Sprout settings from the drop down box, however if you have the Scan kit (seperate cameras, projector etc..) and choose from the drop down box SLS 3 (for example) then the capture stage won't work but the HP 3D Automatic Turntable Pro will.

 

Hope this makes sense. 

Sprout from the drop down box, capture stage works

SLS 3 (or similar) the capture stage wont work

 

Reply
0 Kudos
SteelCityDodge Honor Student
Honor Student
2 0 0
Message 6 of 6
533
Flag Post
HP Recommended

Solved!

HP Capture Stage supported from HP Structured Light Scanner v5 ???

 Capture Stage was only manufactured to work with Sprout, originally with Generation 1 of Sprout. I assume that the support of the capture stage with Gen 2 and the Pro software it ships with is to allow users who originally had a Gen 1 unit, not to buy a new turntable as they upgrade the main unit.

comparing the 2 against each other, the HP 3D Automatic Turntable Pro is a much more solidly built turntable, with calibration degrees etched into the side of the unit. It also does not tilt. Capture stage does tilt (because the camera is static on Sprout). 

Capture stage has only been an accessory to Sprout, never to the Pro kit

Reply
0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation