-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- AI PCs
- Unable to boot into Linux USB

Create an account on the HP Community to personalize your profile and ask a question
11-15-2026 08:02 PM - edited 11-15-2026 08:07 PM
- Bios: Insyde F.16 (April 22, 2026) and F.04 (August 30, 2025)
- Secure Boot Both On & Off
- USB Boot Enabled
- Bitlocker Disabled
- USB Device works across multiple PCs; fails to work as a bootable device for this specific laptop
- Fedora & CatchyOS install fail
- "Boot Device Failed"
- Persists on EFI/BOOT/BOOTX64.EFI
- Fedora & CatchyOS install fail
I have tested multiple ISOs (Ubuntu, Fedora, CatchyOS), all of which produce the exact same error. Moreover, I have tried different image burning tools (BalenaEtcher, Rufus; GPT & UEFI for the latter, former has no option). There appears to be no relevant information concerning this issue.
11-17-2026 11:38 AM
Hi @lunite
Welcome to the HP Support Community.
Thank you for providing the detailed troubleshooting information.
Based on your description, this issue does not appear to be limited to a particular Linux distribution, as you have already tested multiple Linux ISOs and different USB creation utilities. This suggests that the issue could be associated with UEFI firmware compatibility, USB boot initialization, or the EFI bootloader execution on your HP OmniBook 5.
To help narrow down the cause, could you please clarify the following?
- Does the USB drive appear in the F9 Startup Boot Menu under UEFI Boot Sources?
- Does the error occur immediately after selecting the USB drive, or only after manually launching EFI/BOOT/BOOTX64.EFI?
- Have you tried booting from a Windows installation USB? If so, does it boot successfully?
- Have you tried connecting the USB drive to a different USB port, preferably without using a USB hub or adapter?
- After updating to BIOS F.16, did you load the BIOS setup defaults and retest USB booting?
- Could you share a photograph of the exact error message and the F9 Boot Menu?
Your responses will help determine whether this is related to Linux boot media compatibility, UEFI firmware behavior, or a potential BIOS-level issue.
Take care and have an amazing day!
I am an HP Employee If you liked what I wrote, select Yes below to show others I was helpful, If it solved your concern, select ACCEPT AS SOLUTION to highlight the post to others. Want to help others in the community? Become a volunteer through the Solve-a-thon. Click here to learn more → |