cancel
Michael148 Student
Student
1 0 0 0
Message 1 of 2
105
Flag Post
HP Recommended

Charging and typing

Hp Pavilion laptop
Microsoft Windows 10 (64-bit)

My Laptop does not charge when the screen is up but only charges when closed.

 

Further, I'm having problems with typing appearing on the screen in order to login, no words appear.

 

Kind assist

1 REPLY 1
Highlighted
HP Support Agent
HP Support Agent
17202 17181 1247 1862
Message 2 of 2
84
Flag Post
HP Recommended

Charging and typing

Hi! @Michael148,

 

Have you tried charging your laptop using a different adapter or battery?

 

Have you tried using the onscreen keyboard to login?

 

Were there any recent windows update on the PC?

 

Please share the product number of the PC to assist you better.

 

Try updating the BIOS on the PC to the latest version and check if it helps.

 

Please try the steps recommended below.

 

Step 1. Go to Device Manager
Step 2. Select Batteries
Step 3. Right click the "Microsoft ACPI-Compliant Control Method Battery" that is listed there
Step 4. Click Uninstall
Step 5. At the prompt put a check in the box to remove the current driver
Step 6. Shutdown the computer

Step 7: Remove the battery for minute and then put it back in

 

Try performing a hard reset on the laptop and check if it helps.

 

Turn off the computer.
Remove the computer from any port replicator or docking station.
Disconnect all external connected peripheral devices such as USB storage devices, external displays, and printers.
Unplug the AC adapter from the computer.
For most laptops, press and hold the Power button for 15 seconds to reset.
If your laptop model is listed below, use the instructions specific to your computer.
Plug the AC adapter back into the laptop computer, but do not connect any of the peripheral devices.
Press the Power button to turn on the computer.
The computer starts normally or a startup menu opens.
If a startup menu opens, use the arrow keys to select Start Windows Normally, and then press the Enter key.
After Windows opens, reconnect each peripheral device that was disconnected, one device at a time, until all devices are reconnected.

 

Run Power Troubleshooter.

On Cortana, enter  Troubleshooter then select Troubleshooting.
Click Improve power usage to open the window, then click Next. 
This should run the troubleshooter and can fix any detected issues. You may try restarting your computer and charge your battery again.

 

Lastly, try running a battery test from the F2 system diagnostics page and check if the hardware components on the PC are functioning correctly.

 

Refer this article to know more information about running system diagnostics on your PC. Click Here

 

Let me know how it goes!

Take Care! 🙂

 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

A4Apollo
I am an HP Employee

Reply
0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation