-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Notebooks
- Business Notebooks
- Install Camera Zbook 15 G3
Create an account on the HP Community to personalize your profile and ask a question
11-09-2020 11:30 AM
Hello Community!
I bought a used Zbook 15 G3. This is without a camera but the "hole" for that does exist.
Is it possible to upgrade an original camera in and what things do i need exactly?
Or is it because of BIOS and other hardwareproblems impossible?
I hope someone can help me!
With kind regards
Lutz
11-09-2020 02:24 PM
Hi,
It should be possible.
Are you sure you have the hole for the webcam?' (there will be a small hole for the microphonr)
The models which did not come with webcam have Bezel part number
For use only on computer models not equipped with a webcam part number 848241-001
page 39 service manual
So, you might need to replace the Beze if the hole is not present.
Bezel with webcam part number
and you will need the webcam module
Webcam/microphone module (includes double-sided adhesive) part number 848264-001
On page 39 and 41 you can see the steps to install the module.
http://h10032.www1.hp.com/ctg/Manual/c04956181
Hope it helps,
David
Please click on thumbs up for thanks
Please click on accept as solution if answered your question
11-16-2020 09:27 AM
Hello David!
It worked!!!! The cable from the motherboard was there and i only had to connect the camera.
Thanks for your advice!!!
But now there is another problem.
From a friend i got a Thunderbolt 3 dockingstation (HSTNN-CX01 P/N 841830-001). But this is only recognised as USB-C dockingstation.
I had a look into the drivers on the support web but there were quite a lot of drivers and firmware for that dockingstation.
What drivers/firmware should i install and do i have to change something in the BIOS?
Thnks in advance for help!
Didn't find what you were looking for? Ask the community