cancel
Showing results for 
Search instead for 
Did you mean: 
MaartenSchouten
New member
3 0 0 0
Message 1 of 2
676
Flag Post

Silent driver updates with lansweeper

HP Recommended
HP 640G1
Microsoft Windows 10 (64-bit)

I want to update the silent drivers with lansweeper.
Almost all drivers go well except for the next one
sp91562
sp88774
sp90240
sp94594
I run the script as described below.
Afterwards I scan him again if everything is correct.


Relevant software and hardware that I use
clean installation of a 640G1 with W10

What I have already found or tried
This is in the install script:

"c: \ SWSetup \ sp88771 \ setup.exe" / s
"c: \ SWSetup \ sp85673 \ setup.exe" -Install
"c: \ SWSetup \ sp75330 \ setup.exe" / s / qn / L C: \ system.sav \ logs \ BTlog.txt
"c: \ SWSetup \ sp74551 \ Setup.exe" -s -Hideversion / noForceDriver /vLOGFILE=c:\system.sav\logs
"c: \ SWSetup \ sp91903 \ setup.exe" / s / clone_wait / v "/ qn / lv% ProgramData% \ Hotkey_setup.log REBOOT = REALLYSUPPRESS"
"c: \ SWSetup \ sp79338 \ hpucdsilent.exe" "
"c: \ SWSetup \ sp77545 \ setup.exe" / s / v "/ qn / lvx% TEMP% \ HPWBD.log REBOOT = REALLYSUPPRESS"
"c: \ SWSetup \ sp87911 \ InstMultiPkg.exe" / silent
"c: \ SWSetup \ sp87257 \ setupChipset.exe" -s -norestart -log% temp% \ IntelChipset.log
"c: \ SWSetup \ sp88807 \ Setup.exe
"c: \ SWSetup \ sp90248 \ install.cmd"
"c: \ SWSetup \ sp79059 \ SetupME.exe" -s -overwrite -report% temp%
"c: \ SWSetup \ sp74389 \ SetupRST.exe" -s -overwrite -report% temp%
"c: \ SWSetup \ sp92156 \ igxpin.exe" -s -overwrite -nosc
"c: \ SWSetup \ sp72163 \ Bluetooth_Setup.exe" /C:"install.exe / s / v / qn / v / norestart "/ t:" c: \ windows \ temp \ "
"c: \ SWSetup \ sp71815 \ setup.exe" -s -ccxonly -f2C: \ windows \ temp \ arsetup.log
"c: \ SWSetup \ sp88774 \ install.cmd"
"c: \ SWSetup \ sp73219 \ HPlt4111DriverPackage.exe"
"c: \ SWSetup \ sp91562 \ install.cmd"
"c: \ SWSetup \ sp90240 \ SynaWBFFPReader_Setup.exe" / s / l * v! * C: \ programdata \ SynFPRmsiLogs.log
"c: \ SWSetup \ sp71790 \ install.cmd"
"c: \ SWSetup \ sp94594 \ igxpin.exe" -s -overwrite -nosc "

Someone any idea what goes wrong?
there will be a parameter incorrectly
I also see no error message

1 REPLY 1
soccer_dan
Level 8
Level 8
1,195 1,195 74 153
Message 2 of 2
Flag Post
HP Recommended

In this request, you do not mention what the problem is... is there a driver that does not install, or some that install but do not work? an explanation and detail of the problem always help us help you

 

Also, although without any experience with lansweeper, an alternative for getting installation package setup and connfigure for installation is to use HP Image Assistant and use 'Doanload Softpaqs' tab to download and unpack all needed drivers needed for installation... the tool will create an installall.bat script that you can have Lansweeper execute to install all downloaded drivers

I work for HP. However, all opinions and comments are my own.
0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation