5.25 bay adapter

[440powerZ]

I have a Z440 and empty 5.25 bay.

To install 3.5 hdd people here recommended any 5.25" to 3.5" drive bay adapters.Such adapters have holes for screws ( 2 or more ) but z440 doesnt have holes for screws, but "green" plastic tabs.

This tabs have pins on inner side of 5.25 bay and such adapter should have holes , so when you push adapter inside bay it should click to this tabs.

I tried many adapters but no luck.

Can somebody share some advice ?

[DGroves]

the z440 uses a plastic drive carrier

https://www.ebay.com/p/561855041

https://www.amazon.com/HP-z210-Drive-Rails-640983-001/dp/B012BSTCEI

https://www.youtube.com/watch?v=U0so5fVZuVw      (USA only)

[440powerZ]

Thank you for your effort, but you misunderstand my question.

I have 3.5 hdds with plastic carrier in 3.5  cage.  I need adpater for 5.25 cage ( see pic)

No problem with 3.5 drive in 3.5 cage, problem is with 3.5. drive to 5.25 cage.

[DGroves]

for 5.25 devices, no tray is needed, you simply need the correct HP small black mounting screws ( 4 per bay)

Black for CD/DVD

https://www.ebay.com/itm/333885288733?hash=item4dbd1d311d:g:f~EAAOSwdBNgI~t-

silver for some Hard Drives

https://www.ebay.com/itm/153344535200?hash=item23b40beaa0:g:bYYAAOSwo1lcQirv

for 5.25 to 3.5 devices that need a faceplate use  488505-002 and NQ099AA (same part) again the small black screws are required

or you can use 3rd party 5.25 to 3.5trays (again the HP black round mounting screws are needed)

https://www.ebay.com/itm/114224406678?hash=item1a984e2096:g:2qkAAOSwridaQWev

look on eBay