cancel
Showing results for 
Search instead for 
Did you mean: 
Avenger_007
New member
5 2 0 0
Message 1 of 4
1,306
Flag Post

Solved!

Convert SFF to ATX

HP Recommended
HP 8300 SFF (CORE I7 3770)

Hi guys for first thing >> Im gonna say sorry for my bad English !
i have a hp 8300 SFF with i7 3770 Processor and 4 GB ram...
i was thinking change the case and convert it to a bigger case
Because i wanna a powerful graphic card and powerful graphic cards needs more amount of watts
and this power supply is just 240W
i dont know what is my motherboard type or model  ? (is mini atx ? micro ?  what ???) , and i dont know is it going to fit and fix with new case ?
note : if my motherboard is going to fix with big case i will have a larger and stronger Power supply and then i can buy a new graphic card .

please help me my board is compatible with big cases ? can i replace the PSU ? 

1 ACCEPTED SOLUTION

Accepted Solutions
DGroves
Level 11
4,696 4,670 442 993
Message 3 of 4
Flag Post
HP Recommended

the 8300 was available in SFF (235 watt) and a minitower 400 watt supply the supplies are not cross compatible size wise

 

the mini tower can fit either, but the SFF pwr supply wires are to short

 

the SFF uses a smaller sized supply so it will not take the larger minitower one

 

the exact same motherboard is used in both SFF and minitower

 

while there are minitower ATX  adapters, it's not going to work in your case unless you can find a Uniquely  sized atx supply that fits the SFF models and i currently don't know of any

 

also the motherboard is not a ATX standard layout

 

https://www.moddiy.com/products/HP-Compaq-Elite-8300-CMT-PSU-Main-Power-24-Pin-to-6-Pin-Adapter-Cabl... 

 

 

View solution in original post

Was this reply helpful? Yes No
3 REPLIES 3
Photoray002
Level 15
Level 15
12,677 12,431 1,308 4,305
Message 2 of 4
Flag Post
HP Recommended

Moved to the HP workstation section so someone with experience with that machine can offer advice.

Was this reply helpful? Yes No
DGroves
Level 11
4,696 4,670 442 993
Message 3 of 4
Flag Post
HP Recommended

the 8300 was available in SFF (235 watt) and a minitower 400 watt supply the supplies are not cross compatible size wise

 

the mini tower can fit either, but the SFF pwr supply wires are to short

 

the SFF uses a smaller sized supply so it will not take the larger minitower one

 

the exact same motherboard is used in both SFF and minitower

 

while there are minitower ATX  adapters, it's not going to work in your case unless you can find a Uniquely  sized atx supply that fits the SFF models and i currently don't know of any

 

also the motherboard is not a ATX standard layout

 

https://www.moddiy.com/products/HP-Compaq-Elite-8300-CMT-PSU-Main-Power-24-Pin-to-6-Pin-Adapter-Cabl... 

 

 

View solution in original post

Was this reply helpful? Yes No
Avenger_007
Author
New member
5 2 0 0
Message 4 of 4
Flag Post
HP Recommended

Tnx for helping😉

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation