cancel
Showing results for 
Search instead for 
Did you mean: 
Portafreak
Level 1
5 3 1 0
Message 1 of 4
726
Flag Post

HP ProDesk 600 G1 SFF very slow after instralling INTEL-SA-00075????

HP Recommended
HP ProDesk 600 G1 SFF
Microsoft Windows 7 (64-bit)

Hi,

 

We are a school district with about 300 HP ProDesk 600 G1 SFF, and we have noticed a significant slowness after applying the following INTEL-SA-00075:

 

https://www.intel.com/content/www/us/en/security-center/advisory/intel-sa-00075.html

 

Does anyone else has noticed the same thing?

 

We have some older models that are way faster than this one.

 

 

 

3 REPLIES 3
DGroves
Level 11
4,502 4,485 410 940
Message 2 of 4
Flag Post
HP Recommended

reading the link, this update appears to be a firmware update/patch to the systems AMT subsystem i'm guessing that since you have applied this patch that AMT is enabled on the desktops in question

 

if you want to see if it is amt related, try disabling amt on one system and note if the issue you are having changes. if not then AMT is not the problem

0 Kudos
Portafreak
Author
Level 1
5 3 1 0
Message 3 of 4
Flag Post
HP Recommended

I did disable the AMT in bios but it did not change anything. Disk speed test is fine as well as CPU.

I'm running out of ideas..

 

0 Kudos
DGroves
Level 11
4,502 4,485 410 940
Message 4 of 4
Flag Post
HP Recommended

hmmm, you can run the intel tool to confirm the update is applied and working

 

https://downloadcenter.intel.com/download/26755/INTEL-SA-00075-Detection-and-Mitigation-Tool

 

just what are the symptioms of the slowdown? you mention that disk access/cup usage is normal

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation