• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Are you having HotKey issues? Click here for tips and tricks.
HP Recommended
HP ProLiant ML110 Gen9

I have two problems.

The first problem is fans. I have already checked the server's coolers and they are normal. On the Ilo 4 panel, which is in the latest version, 2.82, it says that fan 1 is failed, but only one is installed on the server, not the two that appear on the Ilo 4 panel. What could it be?

 

odirlei_0-1729104732657.png

 

The second problem is Bios/Hardware - Degraded the Bios is in version P99 v2.96 (05/17/2022) which is available below.

The controller is in version Dynamic Smart B140i 62.16.2.64.

A RAID 1 was created with two 1Tb SSD disks and another RAID 1 with two 2Tb SATA 6 disks.

The error that keeps appearing and ( Option ROM POST Error: 1779-Slot 0b Drive Array - Replacement drive(s) detected OR previously failed drive(s) now appear to be operationa ).

 

odirlei_1-1729104781176.png

 

 

3 REPLIES 3
HP Recommended

Hey @odirlei!

Hope you are doing fine!

Thank you for visiting our English HP Support Community. It would be ideal if the post was in English, so that other HP product users like you can also benefit from the information provided here. To ensure a quick response, it would be advisable to post your question in English.

We understand that English is not your primary language, so we advise you to use an on-line translator of your choice to post in the language of our Community.

Thank you for your understanding.

Regards

I work on behalf of HP.
HP Recommended

Orderli,

 

Welcome. To get you the best hope for a quick and accurate answer please refer to Paul's advice in the post HERE .

 

Very few of us here on this forum have that expertise... Good luck with your project.

HP Recommended

i would download and read the HP enterprise's hardware and service manual for your model server

 

doing so will show you where all of the servers case/cpu fans and fan connectors are located

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.