-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Desktops
- Business PCs, Workstations and Point of Sale Systems
- Re: USB 3.0 for Z800
![Sign in](/html/assets/sign-in-banner.png)
Create an account on the HP Community to personalize your profile and ask a question
05-12-2019 06:46 PM
install the USB card in the topmost slot, (the one above the graphics card slot)
remove the usb keyboard/mouse then boot up, wait for the spinning circle to stop
once the mouse arrow appears, connect the mouse, and wait for the circle to again become the normal mouse pointer
now do the same for the keyboard
you should now have card installed, keyboard and mouse working
install the usb 3.0 card drivers (make sure the power cable to the card is attached before driver install)
while i normally use the highpoint cards, i do have one just like yours and it also has the PLX chip however this card requires you to connect a power cable to it for proper operation
06-04-2019 12:46 PM
DGroves,
After spending several frustrating hours trying to get my system to boot with this SATA 3 card I've decided to send it back.
https://www.amazon.com/gp/product/B07NZSBQ5S/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1QNINE SATA Card 4 Port with 4 SATA Cables, 6 Gbps SATA Controller PCI Express Expression Card with Low Profile Bracket, Boot as System Disk, Support 4 SATA 3.0 Devices
I'd like to try the USB 3.0 High Point 4-Port USB 3.0 PCI-Express 2.0 x 4 HBA RocketU 1144D card you've recommended.
https://www.amazon.com/High-Point-PCI-Express-RocketU-1144D/dp/B015CQ8DCS
High Point 4-Port USB 3.0 PCI-Express 2.0 x 4 HBA RocketU 1144D
Could I put my Samsung 860 EVO Win 10 system drive into this USB external enclosure?
https://www.amazon.com/Sabrent-Tool-free-Enclosure-Optimized-EC-UASP/dp/B00OJ3UJ2S/ref=sr_1_1_sspa?k...Sabrent 2.5-Inch SATA to USB 3.0 Tool-Free External Hard Drive Enclosure [Optimized for SSD, Support UASP SATA III] Black (EC-UASP)
Plug it into the High Point USB 3.0 card. Change my boot device to USB and and boot without problems?
Thank you for your help!
06-04-2019 01:02 PM - edited 06-05-2019 07:22 AM
i've not used either card as a boot device much less a non MS operating system and as far as i know, no 3rd party USB card is bootable..... only the motherboard USB ports on current systems (made in the past 6 years or so) are bootable
but based on a simple observation of both cards the highpoint has less parts and also does not pass power to external devices connected to it
what i can say is that on both the z820/z800 using the highpoint card i saw slightly better xfer rates under windows 7 and 10
both cards use the same driver however so feel free to try the drivers from both card makers or directly from the ASMedia site or from the MS driver update catalog i use ver1.16.54.1 and will be testing 1.16.56.1
ASMedia Technology Inc - USB - 3/25/2019 12:00:00 AM - 1.16.56.1 |
https://www.catalog.update.microsoft.com/Search.aspx?q=ASMedia+USB3.0+eXtensible+Host+Controller
- « Previous
-
- 1
- 2
- Next »
Didn't find what you were looking for? Ask the community