-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Poly Video Conferencing
- Collaboration & Conferencing Platforms
- Re: RMX1500 and conference SIP
Create an account on the HP Community to personalize your profile and ask a question
03-10-2015 01:17 PM
Hi all !
I have RMX1500 v.7.6.
I have SIP server (not Lync) and many SIP video end-points (QDX, RealPresence Mobile and others).
Can I used Meeting Room or SIP Factory or Default Entry Queues for multi-point conference ?
I did SIP Server setup in RMX IP Network Services. I made new Conference Profile SIPNEW with routing name "t1"
where 't1' account in SIP server. But if I configure new Meeting Room or Conference with Conference Profile SIPNEW I have error - Falied to connect to SIP registrar.
Please help !
May be I wrong in principle ?
Solved! Go to Solution.
03-26-2015 12:28 PM
Hi, Mike ! :-))))))
I know.
Вut where in the configuration of Meeting Room or SIP Factories I must to specify the sip account login and password ?
If login is "Routig Name" and where password ? Only in the section "IP Network Services-Properties-Security-SIP Auth" I can see usermane and pass. And then RMX successfully registered in my SIPserver (Communigate). For example with sip account name "superrmx". And then I сonfigured new Conf Profile and I сonfigured new Meeting Room with RoutingName as sip account name "superrmx". And then - ALL OK and I have sip meeting room ! But only ONE sip meeting room. If I try to сonfigured another Meeting Room with same Conf Profile (or another Conf Profile) and with sip account name "superpuperrmx" - RMX writes ERROR SIP REGISTAR. Of Course !!!!!! Similarly, with SIP Factories. Perhaps there is a way to make sip-trunk with SIPserver ? Finally I want to make my RMX completely only SIP MCU. Without DMA and without another Microsoft software.
03-27-2015 03:03 AM
Alex,
Please keep in mind that "Identification" and "Authentication" are different things. When you define Conference, SIP Factory, Meeting Room or Entry Queue you identify them by ID and/or Routing Name. In order to these items could be registered you need to provide SIP server with valid credentials defined in Network Service.
Hope this could help to understand the issue.
03-30-2015 04:59 AM
Mike,
I identified several accounts (name and password) on SIP server.
I set up the address, name, port, transport of SIP server in Network Service of RMX.
No more options I can to set up in Network Service of RMX. Only address, name, port, transport type.
For example, I have SIP account name=superpuper and password=12345678.
And I want to registered Conference, SIP Factory, Meeting Room or Entry Queue with
Routing Name "superpuper". In order to these items could be registered I need to specify
account name and specify account password. Account name I'll set up in the field "Routing Name".
And what about the account password ? Where should I specify a password ? In Network Service of RMX ?
Registration on my SIP server requires authentication with name and password.
03-30-2015 06:36 AM
Alex,
You don't need to create several accounts on SIP server, you need to set only one for all registrations generated by RMX. As the example I attached the screenshot of the REGISTER request sent from RMX to DMA (it will be the same for any SIP registrar). This shows the request to register the Meeting Room with Routing Name "MR-1006". The request is sent by user "rmx" with appropriate password defined in Network Service.
Be aware that this is the SECOND request, the first one MUST be rejected by SIP registrar with the reason 407: Authentication Required.
If this standard scenario doesn't work you need to discuss the issue with your SIP server vendor.
Didn't find what you were looking for? Ask the community