cancel
Showing results for 
Search instead for 
Did you mean: 
Get help with Large Format Printers, with direct access to all Latex Knowledge Center · Ask anything · Find anything · Share anything at HP LKC
SPEcit
New member
1 0 0 0
Message 1 of 4
2,134
Flag Post

Blue error Code 00541654

HP Recommended
HP Designjet T520

  I'm getting the Blue Screen with error code 00541654. I've seen a few posts saying to remove the cartridges and print head to try to remove this error. Is there a way to manually move the print head so I can remove it? Currently it is in the far right position and not accessable. I want to try this before I try to replace the ecrypted chip or call a service tech that will be costly. Thanks is advance for the help

HP Designjet T520

3 REPLIES 3
davidzuts
Level 13
7,130 7,062 558 1,025
Message 2 of 4
Flag Post
HP Recommended

You need to post the model number of your machine. Do not post the serial number as the moderator will remove the model information at the same time. Just post the model number.

Was this reply helpful? Yes No
Tabassum_S
Level 3
Level 3
36 36 4 14
Message 3 of 4
Flag Post
HP Recommended


Thank you for using the HP forum.

Error : Blue error Code 00541654

 

Problem Description: Front panel truns in blue screen with error

 

The possible cause could be: Main pca

 

Corrective Action:

 

1. Turn off the plotter, remove the power\network\usb cables from the plotter.
leave the plotter idle for 3 to 5 mins.


2. Turn on the plotter in stand alone mode, if still same error persists Main pca needs to be replaced.

 

3. For the part replacement, contact HP on toll free number for the respective region support.

 

Although I am an HP employee, I am speaking for myself and not for HP.

 

--Say "Thanks" by clicking the Kudos Star in the post that helped you.

--Please mark the post that solves your problem as "Accepted Solution"

Was this reply helpful? Yes No
Tabassum_S
Level 3
Level 3
36 36 4 14
Message 4 of 4
Flag Post
HP Recommended

Thank you for using the HP forum.

 

Error : Blue Screen with error code 00541654.

 

Problem Description: Display not communicating with main pca

 

The possible cause could be: Main pca

 

Corrective Action:

 

1. If you want to try removing cartridges and printhead, please refer below link for user manual.

     http://h10032.www1.hp.com/ctg/Manual/c03498896

 

2. Refer page no 72 to 75 for printhead replacement.

 

3. If still same issue, Main PCA has to be replaced.

 

Although I am an HP employee, I am speaking for myself and not for HP.

 

--Say "Thanks" by clicking the Kudos Star in the post that helped you.

--Please mark the post that solves your problem as "Accepted Solution"

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation