-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Printers
- DesignJet, Large Format Printers and Digital Press
- Design jet error code 22.1:00
Create an account on the HP Community to personalize your profile and ask a question
03-29-2017 12:37 PM
any one to hepl me for designjet t2500 error code 22.1:00 itry to enter service mode after enter same result best regard if any one answer my question thank you
Solved! Go to Solution.
Accepted Solutions
03-30-2017 12:36 AM
thank you for reply sir davidzuts,i try replace PCA board same issue
the unit is boot normaly hp logo then initializing 1% goto 70%after comming error code 22.1:00
the ids section left and rigth is working i replace already from other machine
03-29-2017 08:33 PM
22.1:00 Front-panel-side ink supply station error
Call agent:
1. Use the power switch at the rear to turn off the printer, then disconnect the power cord.
Reconnect the power cord, then turn on the printer.
2. Perform the ink delivery system diagnostic test to troubleshoot the problem further.
Service engineer:
1. Check that the cables between the ink supply station and the engine PCA are not damaged and are
properly connected. In case of any damage, replace the cable.
2. Replace the ink supply station on the front panel side.
3. Replace the engine PCA. See Engine PCA on page 285.
03-30-2017 12:36 AM
thank you for reply sir davidzuts,i try replace PCA board same issue
the unit is boot normaly hp logo then initializing 1% goto 70%after comming error code 22.1:00
the ids section left and rigth is working i replace already from other machine
Didn't find what you were looking for? Ask the community