-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- DesignJet, Large Format Printers and Digital Press
- DesignJet T520 only Printing half page...

Create an account on the HP Community to personalize your profile and ask a question
02-08-2021 07:22 PM
Started out printing some plans.....The first set printed fine... went to print the second set about an hour later... It printed only half page. It has done this before, but I'm not sure what I did to get it to print the whole page...I've tried everything!
Solved! Go to Solution.
Accepted Solutions
02-09-2021 02:34 AM
Please do install the correct driver Hpgl2 or the pcl found on
https://support.hp.com/us-en/drivers/selfservice/hp-designjet-t520-printer-series/5263079 Hpgl2 driver OR
https://support.hp.com/us-en/drivers/selfservice/hp-designjet-t520-printer-series/5263079
selecting your Os .. install and try to print if solved its very good
other wise if still missing or lines and info your file could need too much processing
before printing go to printer properties from the application you are using go to preferences ,then use the last tab advanced and select print job as bitmap enable .. et voila
reference
https://support.hp.com/us-en/product/hp-designjet-t520-eprinter-series/5263079/document/c03559802/
user guide
http://h10032.www1.hp.com/ctg/Manual/c03498896 and search for bitmap
if it is solved please do mark as solved Thank you
02-09-2021 02:34 AM
Please do install the correct driver Hpgl2 or the pcl found on
https://support.hp.com/us-en/drivers/selfservice/hp-designjet-t520-printer-series/5263079 Hpgl2 driver OR
https://support.hp.com/us-en/drivers/selfservice/hp-designjet-t520-printer-series/5263079
selecting your Os .. install and try to print if solved its very good
other wise if still missing or lines and info your file could need too much processing
before printing go to printer properties from the application you are using go to preferences ,then use the last tab advanced and select print job as bitmap enable .. et voila
reference
https://support.hp.com/us-en/product/hp-designjet-t520-eprinter-series/5263079/document/c03559802/
user guide
http://h10032.www1.hp.com/ctg/Manual/c03498896 and search for bitmap
if it is solved please do mark as solved Thank you
02-09-2021 07:39 AM
I have the same thing happening here with my DesignJet T120.
It has been happening since the November 2020 driver update.
So far I have only seen it with multi-page prints. eg. see photo attached of the output from two attempts to print to different A3 Landscape documents, one of 6 pages, the other of 9 pages. In both cases it printed one full page and then halfway through the second page it just stopped and spat out an incomplete page. No error messages on printer or in Windows 10. No sign of the rest of the document after page 2, the other pages never appeared. This is a pretty annoying waste of paper and ink. Having to print these docs one page at a time a manually is pretty inconvenient too 😕