-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Printers
- DesignJet, Large Format Printers and Digital Press
- Re: Designjet 1050C not seen by Windows
Create an account on the HP Community to personalize your profile and ask a question
11-16-2018 04:27 PM
Can't seem to get my PC to recognise the printer. I thought it was, but probably just seeing it as far as the drivers being there. The service print has error codes refering to the jetdirect card, also says I/O CARD NOT READY/ INCOMPLETE F/W -MUST DOWNLOAD
So, I thought I would take out the jetdirect and go with parallel adapter to USB- When I did that, I could get the printer screen to flash "RECEIVING" for about 4-5 times, then nothing. Comes up as error in print que
Any thoughts would be appreciated- Thanks in advance
11-18-2018 05:15 AM
Maurice,,
I would hook up your printer and ethernet cable to your router and follow this video. This will reset your card. Your default gateway will be your internet router. This will be much faster than usb as far as recieving and sending print files.
Do the steps he shows you on resetting the card and you should be able to bring the printer card up on computer screen.
https://www.youtube.com/watch?v=hIV4w29H8w4
let us know what happens.....
11-18-2018 04:55 PM
Unfortunetly, the printer in the vid is different than mine, so the commands on the printer itself work differently as well. When I try to get in to the printer through the web browser, the connection times out and doesn't connect. There are a lot of settings on my printer that I'm not sure are set right, like
CONFIGURE NETWORK
CONFIGURE TCP/IP
BOOTP
DHCP
IPX/SPX
DLC/LLC
ETALK
Thats the majority, thanks