Designjet z6200 not power on

piano999 · ‎11-28-2020

My Designjet z6200 does not power on. Only Amber LED is On.

So I try to remove the button battery and reattach on the formatter, it to turn it on.

After that power off, the power will not turn on unless you do the same work.

Heip me.

Repairatrooper · ‎11-29-2020

did you replace the battery with a new one? Maybe the battery is shot.

If you find the information provided useful or solves your problems, help other users find the solution easier by giving kudos and marking my post as an accepted solution.
I am a volunteer, offering my knowledge to support fellow users, I do not work for HP nor speak for HP.

piano999 · ‎11-29-2020

Thank you Repairatrooper

Before replacing the battery, the electrolytic capacitor had exploded, so I replaced 9 of them. Is this relevant?

Repairatrooper · ‎12-01-2020

Were the caps on the main board or in the power supply? It is possible that other components were damaged when the cap blew. Also recheck and make sure that all the caps are in the properly polarity.

If you find the information provided useful or solves your problems, help other users find the solution easier by giving kudos and marking my post as an accepted solution.
I am a volunteer, offering my knowledge to support fellow users, I do not work for HP nor speak for HP.