-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- DesignJet, Large Format Printers and Digital Press
- Error code 2.1.10 can be a carriage problem or printhead pro...

Create an account on the HP Community to personalize your profile and ask a question
10-29-2021 09:53 PM
I had printer to tell me to reseat red MK red printhead, which I did twice. The third time I got an error code 2.1.10. Checking on this it says it can be a PAC carriage problem or printhead problem. I am hoping it is printhead since I got the notification. My question is this--How can I get to the printheads with the carriage locked?
10-30-2021 07:26 AM - edited 10-30-2021 07:29 AM
it is the carriage box problem... check trailing cable. not related with printheads ..
you need to find the service manual & see steps to remove left front cover. Check the 2 ribbons
plugged onto the pca board. otherwise have to check other side to the carriage box, that will be
much much harder to perform...
I doubt if you could get to the printheads, because that error code comes up very fast.
good luck.
10-30-2021 08:01 AM
Turn off the power and unplug the power cord.
Look on the back of the right cover (as viewed from the front) and there should be a hole back there and a little sticker that tells you what size torq driver to put in and which way to turn it to free the carriage to move. Turning the screw moves the service station forward and away from the printheads to free up the carriage.
Ruben, do you recall the size of the torq driver needed? I don't.
10-30-2021 09:23 AM - edited 10-30-2021 12:24 PM
@d_hook:
T10 turn left few times till service station moved...gee, more troubles & have to remove the right cover.
Never forgot few years back, when Mr David Zuls? replied me the same error when I got my Z3100 trouble ... hehe
If you search this error post, you could see my post with other user name jasonmiamifl