Showing results for 
Search instead for 
Did you mean: 
New member
1 0 0 0
Message 1 of 2
Flag Post

HP Deskjet T790 44 inch plotter Error Code 21:13 HP Support - WHATs UP?

HP Recommended
Deskjet T790
Microsoft Windows 7 (64-bit)

HP Deskjet T790 44 inch plotter Error Code 21:13 HP Support - WHATs UP?

D Hook
Level 7
821 769 34 90
Message 2 of 2
Flag Post
HP Recommended

This is from the service manual:  (ignore the YZ.  The "13" just indicates that the problem may need to be addressed by an HP tech instead of the customer.)


System Error: 21:YZ
Problem Description: Failure moving Service Station
Corrective action: Try the following:
1. Switch the power off from the back of the product and disconnect the power cord. Check
the Primer Tubes. Reconnect the power cord and power on the product.
2. Make sure that the Service Station path is clear. Remove any visible obstacles (screws,
plastic parts, etc.) restricting the movement of the Service Station.
3. If the carriage has stopped over the service station, on the right side of the product, check
that the cutter is not activated. The cutter may be blocking the carriage over the service
station, preventing the service station from performing the movement correctly. The cutter
is on the left side of the carriage.



There's a free download of the service manual on the web.  Just google "Designjet T790 Service Manual" or go to the website and do a search for it.  Free download.  LPS is great source for parts if needed.  (No affiliation, just satisfied customer.)


Someone else might chime in that has had this same issue before.

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation