cancel
Showing results for 
Search instead for 
Did you mean: 
Get help with Large Format Printers, with direct access to all Latex Knowledge Center · Ask anything · Find anything · Share anything at HP LKC
LarTheEA
New member
1 0 0 0
Message 1 of 2
205
Flag Post

How do I Print *LARGER* than ANSI E

HP Recommended
HP Designjet T1700
Microsoft Windows 10 (64-bit)

With other plotters, I could set a custom size to plot.  Driver doesn't seem to have that setting.  When I try to use the Postscript Custom Page Size, it chops the drawing, and paper at about 54 inches - even though I'm giving it ample margins and told it 116in.  Ideas...?  Using 42 in paper on Roll - would like to use entire width by however big the drawing is. 

1 REPLY 1
D Hook
Level 7
877 824 37 101
Message 2 of 2
Flag Post
HP Recommended

We had that same problem with a T1200 we own.  Wouldn't print longer than around 60" or so.

 

As a work around, we loaded the Designjet 5100PS driver and use that instead because we could set any custom size we need.  I've printed over 22' and 42 wide using that driver on the T1200.  Just be sure to assign the new driver to the same port you're using now.

 

You could probably also use the Designjet 5500PS driver as well.

 

If you load it and it doesn't work, just delete that driver.

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation