Create an account on the HP Community to personalize your profile and ask a question
10-09-2019 03:18 AM
Hi guys, I was wondering if it's possible to print double-sided if the paper size is bigger than the A3 tray and has to be fitted by the paper roll slot. I'm printing some prototypes for A2 instructions for use, which is black and white, mostly text, and I'm not pretty sure if there is any way to do the roll printing then cut it and put it back to print the other side. Thank you in advance. Have a good day.
10-09-2019 03:43 AM
I dont' see any reason why not. As long as you can get the alignment so the end look is what you want.
We used a Designjet 5000 60" printer to print fake newspapers on newsprint paper for stage use. We would print one side, roll it onto a roll and feed it back into the printer. It came out fine. Well, it looked good from where the audience was sitting anyway.
So I don't see any reason why you can't try it. You may want to go a little lighter on the ink so you don't have too much bleed through. Try a small sample before doing the whole project?
10-09-2019 12:33 PM
Print second side through the sheet feed assembly.
I am a volunteer, offering my knowledge to support fellow users, I do not work for HP nor speak for HP.
Didn't find what you were looking for? Ask the community