cancel
Showing results for 
Search instead for 
Did you mean: 
Get help with Large Format Printers, with direct access to all Latex Knowledge Center · Ask anything · Find anything · Share anything at HP LKC
Murugan_MK
New member
1 0 0 0
Message 1 of 2
240
Flag Post

Priniting color not accurate

HP Recommended
HP315
Microsoft Windows 7 (64-bit)

Priniting color not accurate. recently the engineer replaced the printhead. it was ok and after few day again the color not accurate. printing was look very pale. any solution.

Media:Adhesive Vinyl
Pass: 10

1 REPLY 1
Roy_Kuzmich
Level 6
217 187 21 32
Message 2 of 2
Flag Post
HP Recommended

With the Latex printers you have to redo the color calibration if you see variances in color.

It also a good idea to change both Printheads of the same colors at the same time to keep some consistency.

There is a selection box within each media profile for Long run color consistency - try selecting this option.

You could also try reloading the media profile as it may have become corrupt.

Keep your room Humidity around 50% for best results as well. 

 

Check the Latex Knowledge Centre as well, there may be a solution to your issue already posted there.

 

Good Luck.

Roy K

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation