Guidelines
We have new content about printers, Click here to check it out!
Get help with Large Format Printers, with direct access to all Large Format Knowledge Center· Ask anything · Find anything · Share anything at HP LKC
Locked

‎06-19-2023 08:24 AM

HP Recommended
Product: Designjet T2600dr
Operating System: Microsoft Windows 11

I have a DesignJet  T2600dr printer that will print fine half the time but the other half the documents that I send to get printed will get "stuck" in queue. This will persist for sometime between 5-10 minutes and then print a page off. After the first page gets printed it will go back into queue for around the same amount of time and just print a single page again. Obviously for large jobs this will take a very large amount of time to complete the print job. We previously had a DesignJet T2530 printer that did not have this issue. I believe the correct driver is installed as I downloaded off of the HP website. Any help would be appreciated. 

Category:
Warning
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.
Didn't find what you were looking for? Ask the community
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.