• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
We have new content about printers, Click here to check it out!
Get help with Large Format Printers, with direct access to all Large Format Knowledge Center· Ask anything · Find anything · Share anything at HP LKC
HP Recommended
T739

I have a designjet t730 in for repair.

The printhead is not seen, saying missing damaged or not seated correctly.

It was replaced with a new one, but this made no difference.

I then installed a known good head. 

Again no progress.

I then took a known working carriage board off a machine installed and tested it.

Again  no progress. Same error.

I'm thinking there is only the main board or the trailing cable left.

Machine boots ok carriage moves across etc etc. 

I did a oobr  - no change

Any advice

Thanks

 

 

 

 

1 REPLY 1
HP Recommended

maybe check that color inktube & see if any air bubbles....

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.