cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
Get help with Large Format Printers, with direct access to all Latex Knowledge Center · Ask anything · Find anything · Share anything at HP LKC
Binky3
New member
2 1 0 0
Message 1 of 4
1,303
Flag Post

Solved!

error 8:11 #1 light on formatter solid red .. rest off

HP Recommended
t790
Microsoft Windows XP (64-bit)

we have replaced the EE unit due to another error. Tried a emergancy firmware, wouldn't take it ..still get the 8:11. I have checked all cables, they look fine.

I thinking the formatter and HDD are next.

Correct?

 

1 ACCEPTED SOLUTION

Accepted Solutions
Mikeg81
Level 10
Level 10
2,276 2,174 113 233
Message 2 of 4
Flag Post
HP Recommended

Hi,

 

Yes, when you get a 08:11 and he Led 1 on the formatter is on, 2 and 3 are off there is a problem with the formatter.

 

What was the error before you replaced the EE? and What do you mean with EE?

 

Best regards

Mike G

I'm an HP Inc employee. But my response is not in behalf of HP Inc

View solution in original post

Was this reply helpful? Yes No
3 REPLIES 3
Mikeg81
Level 10
Level 10
2,276 2,174 113 233
Message 2 of 4
Flag Post
HP Recommended

Hi,

 

Yes, when you get a 08:11 and he Led 1 on the formatter is on, 2 and 3 are off there is a problem with the formatter.

 

What was the error before you replaced the EE? and What do you mean with EE?

 

Best regards

Mike G

I'm an HP Inc employee. But my response is not in behalf of HP Inc

View solution in original post

Was this reply helpful? Yes No
Binky3
Author
New member
2 1 0 0
Message 3 of 4
Flag Post
HP Recommended

EE box = engine board / power supply  left hand bottom.. where all the cables from control panel and data lines plug into... had a specfic error to that..customer had MAJOR power hit to the building .

 

Was this reply helpful? Yes No
davidzuts
Level 13
7,130 6,101 558 941
Message 4 of 4
Flag Post
HP Recommended

Your issue is the formatter.

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation