cancel
Showing results for 
Search instead for 
Did you mean: 
Get help with Large Format Printers, with direct access to all Latex Knowledge Center · Ask anything · Find anything · Share anything at HP LKC
tanelonr
New member
3 2 0 0
Message 1 of 9
3,605
Flag Post

Solved!

firmware for designjet T1100 plotter

HP Recommended
designjet T1100 44inch
Other

Hi,

    I found the archived posts with links to the firmware, but they were dead links.  would someone please post the updated link to the firmware for this plotter? 

 

as a side note, why is it so hard to find?  would it be hard to put a link in the plotter "support page"?  perhaps there is a technical reason regarding this firmware/plotter specifically, I don't know... 

 

in any case,  Thanks in advance.

FD

1 ACCEPTED SOLUTION

Accepted Solutions
rasheddul
Level 7
634 609 35 85
Message 4 of 9
Flag Post
HP Recommended
Please check below link for printer firmware

https://support.hp.com/gb-en/drivers/selfservice/swdetails/hp-designjet-t1100-printer-series/3338887...
Regards/Rashed
https://www.linkedin.com/in/rasheddul

View solution in original post

Was this reply helpful? Yes No
8 REPLIES 8
rasheddul
Level 7
634 609 35 85
Message 2 of 9
Flag Post
HP Recommended
Please select your desire printer model and then select driver and choose windows....then download the latest firmware which is your needed....


https://support.hp.com/gb-en/products/identify?q=HP%20DesignJet%20t1100&filter=


I hope that will help to you... If yes please accept my solution and give thumbs....

Regards
Rashed
Regards/Rashed
https://www.linkedin.com/in/rasheddul
Was this reply helpful? Yes No
tanelonr
Author
New member
3 2 0 0
Message 3 of 9
Flag Post
HP Recommended

HI

I've been on those pages, and I'm not seeing a firmware download. only drivers...  I even went so far as to download the drivers and unzip them to see if it was included... but no luck.

Thanks

 

Was this reply helpful? Yes No
rasheddul
Level 7
634 609 35 85
Message 4 of 9
Flag Post
HP Recommended
Please check below link for printer firmware

https://support.hp.com/gb-en/drivers/selfservice/swdetails/hp-designjet-t1100-printer-series/3338887...
Regards/Rashed
https://www.linkedin.com/in/rasheddul

View solution in original post

Was this reply helpful? Yes No
tanelonr
Author
New member
3 2 0 0
Message 5 of 9
Flag Post
HP Recommended

Perfect, thank you,  I don't know why the the link didn't sho up for me on the general support page.  did you have to choose a specific version of windows?

Was this reply helpful? Yes No
rasheddul
Level 7
634 609 35 85
Message 6 of 9
Flag Post
HP Recommended
I have selected win 7 32bit...then auto7comed here....
Regards/Rashed
https://www.linkedin.com/in/rasheddul
Was this reply helpful? Yes No
Richard707
New member
2 2 0 0
Message 7 of 9
Flag Post
HP Recommended

Hi Rashed

Thanks for your useful post! I've also downloaded the firmware update, but don't know how to use it. The HP documentation I can find wants me to use HP Easy Printer Care, which I can see has been withdrawn som years ago, and I don't know what to do!! I'm running Win7 Home. I'd be very grateful for any help from you or anyone else!!!

Was this reply helpful? Yes No
Richard707
New member
2 2 0 0
Message 8 of 9
Flag Post
HP Recommended

Actually I think I might have found it here:

https://www.driverguide.com/driver/detail.php?driverid=1375885&auth=At82snaUidNtrCvtF7wFYmllar0f3%2B...

I just can't test it for a few days.

Was this reply helpful? Yes No
D Hook
Level 7
877 824 36 101
Message 9 of 9
Flag Post
HP Recommended

You can use the Embedded Web Server to update the firmware.  Are you connected to the internet with the printer?  If so, find the ISP number listed in the front panel menu under the Network tab.  Open a tab on the internet on your computer and type that number into the new tab area, just like you'd type in "WWW.HP.com" except don't use the "WWW" or the ".com".  So if I wanted to connect to my T1200 I would type in 192.168.200.119.   It should connect you to your printer.  There should be a tab on that page that allows you to update the firmware via the internet connection.

 

You'll need to have the firmware file on your computer desktop.  Be sure you have the firmware and not the driver.  This link takes you to the HP site that you'll need to choose the correct model of your printer:

 https://support.hp.com/us-en/products/identify?q=Designjet%20t1100&filter=

Click on the model of your printer and the net page will list the drivers first, then the firmware towards the bottom of the page.

 

 

Update to let us know how it came out.

 

BTW, use care on the Driverguide website.  Be sure you're downloading the file you want and not a program from them.  I've been on that site before and all the large "Download" icons are actually links to their software where they try to sell you a bloatware program that searches for your driver.  It's a rip off, since it's free on the HP website.

 

 

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation