cancel
Showing results for 
Search instead for 
Did you mean: 
Get help with Large Format Printers, with direct access to all Latex Knowledge Center · Ask anything · Find anything · Share anything at HP LKC
OB2OBX
New member
4 2 0 0
Message 1 of 5
600
Flag Post

Solved!

paper binding up - won't feed into printer

HP Recommended
designjet t1100mfo
Microsoft Windows 7 (64-bit)

paper binding up - spindle very hard to turn and won't feed into printer.  Using a new 24" x 500' roll.  Works fine with 44" paper that is near the end of roll.  Have taken 24" roll out and reinserted many time to no avail.

 

Any ideas or suggestions greatly appreciated

1 ACCEPTED SOLUTION

Accepted Solutions
davidzuts
Level 13
7,130 7,062 558 1,025
Message 4 of 5
Flag Post
HP Recommended

300 feet is the max so that is your problem.

View solution in original post

Was this reply helpful? Yes No
4 REPLIES 4
davidzuts
Level 13
7,130 7,062 558 1,025
Message 2 of 5
Flag Post
HP Recommended

Is this a standard roll or oversized. The only way the spindle will not turn is if the paper is hitting the inside of the bay where the spindle sits. If the roll is oversized you have to remove a large amount from the rolls to get it down to a thickness that will be accepted in the roll feed. Remember the spindle turns when the paper is pulled in by the rollers on the inside of the printer. In other words the spindle is free moving and the only thing that will prevent it from turning is if the roll is to thick (diameter).

Was this reply helpful? Yes No
Jorge70
Level 4
101 101 6 13
Message 3 of 5
Flag Post
HP Recommended
I think too what the 24" x 500' is oversize roll.
Was this reply helpful? Yes No
davidzuts
Level 13
7,130 7,062 558 1,025
Message 4 of 5
Flag Post
HP Recommended

300 feet is the max so that is your problem.

View solution in original post

Was this reply helpful? Yes No
OB2OBX
Author
New member
4 2 0 0
Message 5 of 5
Flag Post
HP Recommended

Thanks.  For some reason the HP site shows the unit can handle 1500 of paper. 

Guess I will be remving some paper off hte roll.  Enjoy the weekend

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation