cancel
Showing results for 
Search instead for 
Did you mean: 
Get help with Large Format Printers, with direct access to all Latex Knowledge Center · Ask anything · Find anything · Share anything at HP LKC
PKS28
New member
2 1 0 0
Message 1 of 4
295
Flag Post

problem with lates 3100

HP Recommended
Latex 3100
Microsoft Windows 7 (64-bit)

Hi,

We have problem on HP Latex 3100 which is hard down now. There were some software upgrades done on the firmware which is resulting into a fault & not allowing it to be cleared.

System Error 22.02.11:06 - which disarms the machine

This fault relates to a possible broken bag in the light Cyan intermediate tank in slot 11

The tech found that the Light Cyan bulk ink box was empty

We have replaced the empty bulk ink unit and have tried to activate the intermediate tank replacement but every time the machine starts up it goes straight into fault and will not allow me to proceed with any diagnostics or repairs whilst it is Disarmed.

3 REPLIES 3
skuks
Level 5
249 247 13 34
Message 2 of 4
Flag Post
HP Recommended

Information by the book:

https://printcopy.info/index.php?mod=erc&brand=HP&model=Latex+3000&code=22.02.11%3A06+...+22.02.72%3...

But for more information go to https://hplatexknowledgecenter.com/

May be there latex magicians could help more 🙂 but the tech support guy must know where to check before starting the printer...

Was this reply helpful? Yes No
PKS28
Author
New member
2 1 0 0
Message 3 of 4
Flag Post
HP Recommended

may thanks, the problem is that I have replaced the empty bulk ink unit and have tried to activate the intermediate tank replacement but every time the machine starts up it goes straight into fault and will not allow me to proceed with any diagnostics or repairs whilst it is Disarmed. is there a way to get into diagnostics, which is not currently happening. 

Was this reply helpful? Yes No
skuks
Level 5
249 247 13 34
Message 4 of 4
Flag Post
HP Recommended

My opinion - not everything is properly checked or cleaned by the technician.... connectors, ink in the airlines if this error is popping up...check the link I sent you and make some conclusions..may be this technician must visit you again...

Found some manual:

https://yadi.sk/d/Kwh_mCQCtj4b3,

But honestly I'm not the guy to help in this case...

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation