• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
We have new content about printers, Click here to check it out!
Get help with Large Format Printers, with direct access to all Large Format Knowledge Center· Ask anything · Find anything · Share anything at HP LKC
Locked

‎05-20-2019 01:47 PM

HP Recommended
Product: DesignJet T2300
Operating System: Microsoft Windows 7 (32-bit)

i loaded the wrong firmware. unit was functioning and i was doing an update. i updated the fireware to IG_12-00-00.3-INCR-IG_06_00_00.2 and once i did i started getting error 21.2.13 . so i have tried communicating with the plotter using software and a USB cable but cant get it to take firmware. have tried booting unit up with firmware on USB and it wont take it either. front display will not let me by that error code.

1 ACCEPTED SOLUTION

Accepted Solutions

‎05-20-2019 09:19 PM

HP Recommended

This error code is a stalled service station. I would open the front window and make sure that nothing is blocking movement. Also make sure that the cutter is not engaged as this will cause this error. Cutter is on the left side of the carriage.

If you find the information provided useful or solves your problems, help other users find the solution easier by marking my post as an accepted solution. Clicking "yes" on "was this reply helpful" also increases the chances that this solution will help others.
I am a volunteer, offering my knowledge to support fellow users, I do not work for HP nor speak for HP.



View solution in original post

Was this reply helpful? Yes No
2 REPLIES 2

‎05-20-2019 09:19 PM

HP Recommended

This error code is a stalled service station. I would open the front window and make sure that nothing is blocking movement. Also make sure that the cutter is not engaged as this will cause this error. Cutter is on the left side of the carriage.

If you find the information provided useful or solves your problems, help other users find the solution easier by marking my post as an accepted solution. Clicking "yes" on "was this reply helpful" also increases the chances that this solution will help others.
I am a volunteer, offering my knowledge to support fellow users, I do not work for HP nor speak for HP.



Was this reply helpful? Yes No

‎05-21-2019 12:12 PM

HP Recommended

OMG thank you so much. it was a jammed print head i dont know what loading new firmware into it did to cause the issue but i had to put pressure on it to get it to move when it was tring to cycle and it took off. i have had people tell me to replace it, to call tech support( which i did and they were no help). i called my local HP support company and they would not even come out and look. if you are ever in Nashville look me up i owe you one buddy.

Max

Was this reply helpful? Yes No
Warning
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.
Didn't find what you were looking for? Ask the community
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.