09-13-2018 11:27 PM
Hello, what is the code to get into the Booty Mode Menu on a HP 370? To get into service menu is 3174. But after that I need to get into the Boot Mode Menu which asks for a code also. I can't find it in the service manual.
09-14-2018 02:10 AM
More details for you
1. Service Utilities
1.1 Boot Mode Menu
1.1.1 Force Diagnostic StartDescriptionThe Force Diagnostic Mode diagnostic utility allows you to tell the printer to start every time in diagnosticmode.
This is useful if you will be performing multiple tests running from diagnostic mode. This feature isalso included in the Diagnostic Menu.
NOTE:Once you force the printer to start in diagnostic mode, in order to change back again, you mustperform the Force Normal Boot diagnostic utility from the Diagnostic menu; or, if the printer is still in normalmode, from the Service menu.
1.Go to Service Menu > 1 Service Utilities > 1.1 Boot Mode Menu > 1.1.1 Force Diagnostic Start.
2.The printer asks you to confirm that you want to the printer to start in diagnostic mode.3.Press OK to confirm, or Cancel to make no changes and exit.
1.1.2 Force Normal StartDescriptionThis selection must be made after you no longer want the printer to start in diagnostic mode. After thisselection is made the printer will start as normal. This feature is also included in the Diagnostic Menu.
1.Go to Service Menu > 1 Service Utilities >
1.1 Boot Mode Menu >
1.1.2 Force Normal Start.
2.The front panel asks you to confirm.
I hope that info will help to you. If help this topics please accept my solution and give me thumb.
09-14-2018 07:41 AM