• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
The Poly Phones Knowledge Base is live! We look forward to helping you with common issues and troubleshooting advice!
HP Recommended

Hello;

    I have 670's running uc software 4.0.11 and vvx600's running uc software 5.5.0. In my cfg file, I have the following softkey defined.

 

                call.directedCallPickupMethod="legacy"
                call.directedCallPickupString="*8"

 

                softkey.4.label="Pickup"
                softkey.4.action="*8"
                softkey.4.precede="0"
                softkey.4.insert="0"
                softkey.4.enable="1"
                softkey.4.use.idle="1"
                softkey.4.use.active="0"
                softkey.4.use.alerting="1"
                softkey.4.use.dialtone="1"
                softkey.4.use.proceeding="0"
                softkey.4.use.setup="0"
                softkey.4.use.hold="0"

 

For some reason, I have 2 softkeys showing "Pickup" appear.  On the vvx600's the Pickup keys both work using *8 (defined in my Asterisk 11 config). What also has me stumped is that on the 670's, one of the softkeys works using '*8', while the other has no action defined. Any insight into what I am missing here would be appreciated.

John V

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.