cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
The HP Calculator Community Message Board is moving. While we prepare for the move, we are unable to accept new postings. During the move, you can look for help from other users by visiting https://www.hpmuseum.org/ . Or if you need technical support for your calculator visit: HP Calculators. .
EmK530
Level 1
6 3 0 0
Message 1 of 4
289
Flag Post

30-40 second BIOS time after installing a new SSD

HP Recommended
Pavilion Gaming Desktop 790-0812no
Microsoft Windows 10 (64-bit)

So, I recently bought an NVMe drive with 500GB of storage. And a PCIe 3.0 4x adapter along with it.

After installing the drive, I've noticed that boot times have increased by lots of seconds. The part that gets slowed down is the actual startup of the PC, before the keyboard gets power and the display comes up.

Going into BIOS, I can disable the PCIe x4 slot and that fixes the slowdown.

I've tried a lot of things and I don't really know what else to do, any help?

 

If relevant, I have installed another thing which is an extra stick of ram which was long ago. I've also got a portable 2tb hdd but removing it doesn't really do anything.

3 REPLIES 3
Grzwacz
Level 12
Level 12
7,153 5,668 679 1,459
Message 2 of 4
Flag Post
HP Recommended

Hi,

 

I see you have a 256 GB M.2 drive installed in the M.2 socket integrated on the MB. I presume the operating system is on this drive.

 

Adding the PCIe M.2 adapter for additional storage may be causing the additional BIOS load time.

 

I don't know what to tell you. Move the operating system to the new 500 GB M.2 SSD and install this device in the MB M.2 socket. Eliminate the M.2 PCIe adapter.

 

Or stay the course and live with a respectable 30-40 second boot time.

 

Regards

Was this reply helpful? Yes No
EmK530
Author
Level 1
6 3 0 0
Message 3 of 4
Flag Post
HP Recommended

Hello,

 

My windows 10 operating system is installed on the new 500GB drive, the one with the adapter. I just chose to get an adapter because I was not sure if the M2 drive I bought would fit into the slot I already have.

 

The drive that is currently in there has two keys (two holes or however you explain) and the one I bought has one key. Would that one I bought really fit into the slot I have? If so then I can attempt a switch for faster booting. I just need confirmation

 

Thanks

Was this reply helpful? Yes No
EmK530
Author
Level 1
6 3 0 0
Message 4 of 4
Flag Post
HP Recommended

Additional info, I've noticed my GPU doesn't get as hot as it used to. Not sure if this means something

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation