cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
  • ×
    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
Highlighted
New member
2 1 0 0
Message 1 of 4
166
Flag Post
HP Recommended

8 beeps with 2 long a 2 short afterward but no post to anything

Pavilion 570
Microsoft Windows 10 (64-bit)

i couldnt get into bios so i did the key windows and B key but it ended up making it worse by not doing anything i tried many attempts and i cant find another problem

3 REPLIES 3
Highlighted
Level 12
7,676 7,643 323 681
Message 2 of 4
136
Flag Post
HP Recommended

8 beeps with 2 long a 2 short afterward but no post to anything

Hi

 

https://support.hp.com/us-en/document/bph07107


Hopefully one of these documents will cover (and solve) your problem...
https://support.hp.com/ca-en/document/c00042629
https://support.hp.com/us-en/document/c02693833


 

If in doubt please ask.


A Nod Is As Good As a Wink...
Lil_Boy_Blue

0 Kudos
Highlighted
New member
2 1 0 0
Message 3 of 4
124
Flag Post
HP Recommended

8 beeps with 2 long a 2 short afterward but no post to anything

i tried to do so on both but it contiues to beep and wont post i jumped it and took out the battery as well and it still beeps

0 Kudos
Highlighted
Level 12
7,676 7,643 323 681
Message 4 of 4
112
Flag Post
HP Recommended

8 beeps with 2 long a 2 short afterward but no post to anything

Hi
First:- Turn off the computer, press and hold the PWR button for 4 seconds.

Then - Leave only keyboard and mouse connected, disconnect all externally connected
devices such as Docking Station, USB storage devices, displays, and printers.
Unplug the AC adapter from the computer.

Next - Press and Hold the Power button for 15 seconds to Hard Reset.
Rinse and Repeat

Power on your PC, press Esc (repeatedly), then F2 at the prompt.
Choose System Tests (Fast Test does a 4 minute hardware check).

The nuber of beeps tell us the fault..

 

BIOS

2.2

The main area (DXE) of BIOS has become corrupted and there is no recovery binary image available.

Also happens when updating BIOS.

Typically no steps needed.

1. Allow the system to complete its updates and changes.

2. If updates are stalling, attempt Sure Start Recovery.

 

Power button LED blinks 8 times with 8 beepsPerform BIOS recovery with external media (USB/CD-ROM).BIOS or CMOS problem (ROM)

 

If in doubt please ask.


A Nod Is As Good As a Wink...
Lil_Boy_Blue

0 Kudos
Be alert for scammers posting fake support phone numbers on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation