After trying to change ram stick I get 3 long beeps and 2 short beeps

[Weicks0714]

So I put in a ram stick called oloy it's the same one that's in the second slot so I got another one to match and after doing that I turn on the pc and it beeps, so I tried putting back the old ram stick and it continued to beeps so I need help at this point.

[Anand_Andy]

Hi @Weicks0714,

Welcome to the HP Support Community

I understand you are facing an issue with your HP Pavilion Gaming Desktop PC TG01-0000i. Not to worry I will help you to get a resolution to resolve the issue.

Lets' try the below steps:

Crisis BIOS Recovery

1. Turn off the computer, and then connect the power cord.
2. Press and hold the Windows key and the B key at the same time, and then press and hold the Power button for 2 to 3 seconds.

1. Release the Power button but continue pressing the Windows and B keys. You might hear a series of beeps.

• If the HP BIOS Update screen does not display, repeat the previous steps but press the Windows key and the V key. If the screen still does not display, your computer might not support the feature or there is a hard drive issue. Continue to the next section to Recover the BIOS using a USB recovery drive.
• If the Power light turns off, the Power button was held too long. Repeat the previous steps, making sure to hold the Power button for only 2 to 3 seconds.
• If a BIOS recovery message repeatedly displays, continue to the next section to Recover the BIOS using a USB recovery drive.
• If a message that the computer improperly shut down or a boot problem is detected displays, follow the on-screen instructions to resolve the error.
• If Windows starts, update to the latest BIOS version. Go to HP Notebook PCs - Updating the BIOS for more information.
  The HP BIOS Update screen displays and the recovery begins automatically.

If the issue persists, then please follow the steps mentioned on this document: HP Notebook PCs - Computer beeps or a light blinks during startup
 

I hope this helps! Keep me posted. 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!