10-11-2019 12:01 PM
I recently updated the BIOS. Whereas before the updated, as per the settings, the system would boot automatically on the selected days and time.
Now, even though all the settings are correct, the system will not start itself. I've checked, reset and (re)changed them mutiple times without being able to get the system to auto-start.
I shut the system off at night and want it to auto-start (especially when I'm away from home).
Any help would be GREATLY appreciated
BIOS Rev ME2 v80.08
Bios Date 4/172017
10-14-2019 04:39 AM
Welcome to the HP Support Community!
I recommend you follow the below steps and check if it helps.
From a powered-off state, turn on the computer and immediately press the F10 key repeatedly, about once every second.
When the BIOS menu appears, press the Right arrow key to highlight the Advanced tab.
Figure : Advanced tab
Press the Down arrow key to highlight BIOS Power-On, and then press the Enter key to select.
Figure : BIOS Power-On
Press the Up and Down arrow keys to select the day. Then press the Right and Left arrow keys to change the settings. Select Enable to turn on the computer automatically on that day.
Figure : BIOS Power-On menu
Press the Down arrow key to highlight Time (hh:mm).
To set the time when the computer should turn on, do the following:
To increase or decrease the hour setting, use the Up and Down arrow keys.
Press the Tab key to highlight the minutes setting.
To increase or decrease the minute setting, use the Up and Down arrow keys.
The time is in a 24-hour format (for example, 1:30PM is written as 13:30). You can only set one time that will apply to every day the BIOS Power-On feature is enabled.
Figure : Time (hh:mm)
When the BIOS Power-On settings are configured according to your needs, press the F10 key to accept the settings.
- Return to the BIOS menu and press the Right arrow key to highlight the Power tab.
Figure : Power tab
- Press the Down arrow key to highlight the Hardware Power Management, and then press the Enter key to select.
Figure : Hardware Power Management
- Use the Down arrow key to highlight S4/S5 Wake on LAN, and then press the Right arrow key to select Enable.
Figure : S4/S5 Wake on LAN: Enable
Press the F10 key to accept the changes.
- Press the Left arrow key to highlight the File tab.
Figure : File Tab
- Press the Down arrow key to highlight Save Changes and Exit, and then press the Enter key to confirm.
Figure : Save Changes and Exit
Press the Enter key again to confirm.
Figure : Save Changes and Exit confirmation
The computer starts up into Windows.
Let me know how it goes and you have a great day!
If you wish to show appreciation for my efforts, mark my post as Accept as Solution. Your feedback counts!
I am an HP Employee
10-15-2019 08:45 PM
Thanks for the solutions. However, I have already set all those options and the auto-start STILL does not work (I had set them before - I'm a self employed tech and knew where to look).
I have a feeling that the BIOS update is not working correctly.
10-16-2019 07:49 AM
I recommend you contact support to further diagnose the issue.
Here is how you can get in touch with support.
1)Click on this link – www.hp.com/contacthp/
2)Select the product type.
3)Enter the serial number of your device or select let HP detect your product option.
4)Select the country from the drop-down.
5)You should see the HP phone support number or Chat option listed.
I am an HP Employee