BIOS Not ACPI Compliant " Error message installing Windows 7 64 Bit

[KP020913]

Hi Dear,

I was change my  desktop (HP Pavilion Desktop - 570-p026d) from 16 GB RAM to 32 GB RAM (2 X 16 GB), and want to install WIndows 7 64 Bit on 8 TB Harddisk.  When I boot from DVD, It say " A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps :

" The BIOS in this system is not fully ACPI Compliant. Please contact your system vender for an updated BIOS. "

Technical Information:

*** Stop : 0x000000A5 (0x00000011, 0x00000008, 0x9C3EE9B0, 0x20160422)

==========================================================================

That is my BIOS Revision/Date : 82F2 vF.03 01/09/2017

I tried to find same error in this forum but some solution are not ok. 

The only thing I plan is to update RAM and Changing HDD (8TB for work ). The old hard drive is gone. I've tried another new hard drive with the same results. 

Anyone know where to get an update for the BIOS I can load from cd or floppy without Windows running?

Any help would be much appreciated!

Thanks,

Please check my photos as below :

Thanks you and hoping to get solution.

Have a nice weekend.

Kelvin,

Myanmar

[CF4 · Accepted solution]

Hi

HP support is down ATM.

https://support.hp.com/gb-en/product/HP-Pavilion-570-p000-Desktop-PC-series/13823514/model/16450298

https://support.hp.com/gb-en/drivers/selfservice/hp-pavilion-570-p000-desktop-pc-series/13823514/mod...

The above is for Windows 10 only.

However there can be problems with disks over 2 TB.

https://support.microsoft.com/en-us/help/2581408/windows-support-for-hard-disks-that-are-larger-than...

https://carltonbale.com/how-to-break-the-2tb-2-terabyte-file-system-limit/

Sometimes W7 will fail because it does not support the USB ports on a particular machine.

If in doubt please ask.