cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
New member
1 0 0 0
Message 1 of 2
144
Flag Post
HP Recommended

Bios corruption has been detected

Hp slimline desktop 260-a061il
Microsoft Windows 10 (64-bit)

Bios corruption has been detected a message is showing after turning on the pc. This problem came after power was terminated while updating bios. I saw the video of flash bios in desktop but there is no light on the keyboard and mouse then how do i do that as it requires some key combination and after pressing the keys nothing is happened. Please help me.

1 REPLY 1
Highlighted
HP Support Agent
HP Support Agent
26,355 26,310 2,188 3,357
Message 2 of 2
63
Flag Post
HP Recommended

Bios corruption has been detected

@Krishnadeo99 Let's perform a power reset as per HP standards:

 

Ensure your device is OFF.

Unplug all the external devices (If any).

Disconnect the power from the computer

Press and hold the power button for about 30 seconds.

Connect the power supply

Press the power button to turn on your device and check if the issue persists.

 

If the issue persists, after the above steps, try the below:

To recover an earlier version of the BIOS on your computer:

  1. Turn off the computer.

  2. With the computer off, press and hold the Windows key and the B key at the same time.

  3. Still pressing those keys, press and hold the Power button on the computer for 2 to 3 seconds, and then release the Power button but continue to hold the Windows and B keys until the BIOS update screen displays or you hear a beeping sound (usually 8 beeps).

    NOTE: 

    If the key presses do not work, press and release the Power button, and then immediately, press the Windows and B keys at the same time, repeatedly, until the computer beeps or opens the BIOS update screen.

    The power LED light remains on, and the screen remains blank for about 40 seconds before anything displays on the monitor. You might also hear beeping sounds. Eventually, an HP BIOS Update screen displays and the BIOS update begins automatically.

    HP BIOS Update screen showing a progress indicator
     

    • If the HP BIOS Update screen displays proceed to the next step.

    • If the HP BIOS Update screen does not display, do one of the following depending on the condition:

    • Computer starts into Windows: The computer starts into Windows if the power button and keys are released too soon. Repeat the previous steps, holding the power button down for 2 or 3 seconds.

    • Power LED light turns off: The computer turns off if the power button is pressed and held down too long. Repeat the previous steps, holding the power button down for between 2 and 3 seconds.

    • After repeated attempts, the HP BIOS Update screen does not open: Your computer does not support this function or it has a hardware problem that is preventing the tool from opening.

FOR DETAILS & FURTHER INSTRUCTIONS, USE THIS LINK: CLICK HERE & SKIP TO STEP 4 ONWARD

(By the end of this article all the issues should be resolved)

 

Keep us posted,

If you would like to thank us for our efforts to help you, 

Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post, 

Have a great day!

Riddle_Decipher
I am an HP Employee

Reply
0 Kudos
Be alert for scammers posting fake support phone numbers on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation