• ×
    Information
    Windows update impacting certain printer icons and names. Microsoft is working on a solution.
    Click here to learn more
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Windows update impacting certain printer icons and names. Microsoft is working on a solution.
    Click here to learn more
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Any failures related to Hotkey UWP service? Click here for tips.
HP Recommended
HP All-in-One - 24-e035na

Hp start up screen. Black screen blue box -

boot device not found

please install an operating system

Hard disk -(3FO)

F2 - system diagnostics 

Help please 

6 REPLIES 6
HP Recommended

Perform a hard drive diagnostic test

Run the Hard Drive Test in the HP PC Hardware Diagnostics using the steps in this section. There are six hard drive tests. If you think there is a problem with the hard drive, first try the Quick Test (2 to 3 minutes). If the Quick Test does not find a problem, run the Extensive Test (2 hours or more) which also has a Loop Until Error option.
  1. Hold the power button for at least five seconds to turn off the computer.
  2. Turn on the computer and immediately press Esc repeatedly, about once every second. When the menu appears, press the F2 key.
    Figure : System Diagnostics
    Startup Menu with F2 System Diagnostics selected
  3. The HP PC Hardware Diagnostics opens. On the main menu, click Component Tests.
    Figure : Selecting Component Tests from the main menu
    Selecting Component Tests from the main menu
  4. In the Component Tests menu, click Hard Drive.
    Figure : Selecting Hard Drive from the Component Tests menu
    Selecting Hard Drive from the Component Tests menu
  5. In the Hard Drive Tests menu, click Quick Test.
    Figure : Selecting the Hard Drive Quick Test
    Selecting the Hard Drive Quick Test
  6. Click Run Once.
    Figure : Running the Hard Drive Quick Test
    Hard Drive Quick Test - Run once
  7. The Hard Drive Quick Test begins. If the computer has more than one hard drive, select the drive you want to test. To test all the hard drives, select Test All Hard Drives.
    When the test is complete, the results are displayed on the screen. Test results are also available in the Test Logs on the main menu.
  8. If the hard drive passes the Quick Test, but there is still a problem with the hard drive, run the Extensive Test. This test includes the SMART Check, Short DST, Optimized DST, and Long DST. To run these tests individually, select them from the Hard Drive Tests menu.
    If the hard drive fails one of the tests, write down the failure ID (24-digit code) so you have it available when you contact HP Customer Support. The information is also available in Test Logs on the main menu.

 

If you found my answer helpful please say Thanks by clicking on the Thumb's Up icon.
If my answer solved your problem please mark it as the Accepted Solution. Thanks!

HP Recommended

Thank you for your help. What if no failures are found after the extensive test has completed? 

HP Recommended

It may be that the wrong boot device [USB, Optical Drive, etc] is chosen.

Choose F9 from the startup menu then chose your hard drive as the boot device.

This is a 'one time' boot device option.

 

If this works then you will need to reset your BIOS defaults so that your hard drive is automatically selected as the first boot device. 

 

  1. Chose F10 key from the startup menu to enter the BIOS settings menu.
  2. Press the F9 key to reset the BIOS to the default settings [which will reset your hard drive as the first boot device].
  3. Press the F10 key to save the changes and exit the BIOS settings menu.

 

HP Recommended

After pressing f9 i get these options 

After pressing f9After pressing f9

 


Screen that apears when repeatedly  pressing the esc key after switch onScreen that apears when repeatedly pressing the esc key after switch on

 

Screen that appears after hp logo when device is switched  onScreen that appears after hp logo when device is switched on

 Perhaps , the pictures of the screens that appear are more helpful. Many thanks for your help.

HP Recommended

Sorry still stuggling with this 

HP Recommended

OK, just go with the second option then. Probably easier.

 

Use F10 to enter BIOS Setup then F9 key to 'Restore Default settings', which will set your hard drive as the first boot device, then F10 key to save your changes and reboot.

 

If this doesn't work then it is likely that your Operating System [Windows] has become corrupted and needs to be recovered or re-installed.

 

You can try this method first:

Recovery when Windows 10 does not start correctly

 

 

 

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.