Clearing CMOS table in an HCupertino2-H61

[prometeo20082]

Hi everyone

I am refereing a very interesing threath hat is closed by now https://h30434.www3.hp.com/t5/Desktop-Boot-and-Lockup/Blank-screen-after-changing-some-parameters-in.... It is interesting for me becuase I have he sam problem tha I have posed in https://h30434.www3.hp.com/t5/Desktop-Boot-and-Lockup/Specific-procedure-o-clear-CMOS-in-my-p6-2065s... and it is interesing because there is acontroversy between two supposed methods to clear the CMOS. I have tried he method proposed by Grzwacz and nothing happened neiher good nor bad, so then I would like to apply the method of Mdklassen but the problem is I can not locate the traditional JBAT three pins jumper on my mobo, just an UNIDENTIFIED TWO PINS OBJECT or UTPO F15 on the mobo. Can anyone tell me what is the use of this and how ca I use it? HP why doesn't document completely your products?

[Prométhée]

hi

I have not read everything, but it seems to me that you have been given a precise answer, right?
If you can't identify the jumpers, either you have a problem or you risk breaking everything after improper handling.
You have the diagram, seems to me so follow what is indicated
possibly give a picture of where is your problem

[prometeo20082]

Thank you guy. This threath is much longer in another parallel world maybe, anyway. There I got the fix to the problem. Yes I was scared to damage the mobo and in spite of I new the jumper I have to move I didn't are to start the pc in the new jumper position and that was the key to the solution

[Prométhée]

😐