Resolve Windows 10 or update issues on HP computer or printer– Click Here
Hi. I have upg to win 10, when i tried to upg bios ill got 8beep code. Computer tries to recover bios over och over again but it fails . Can i make an usb flash to recover to the old version?
@Manitrosa Welcome to HP Community!
I understand that you are unable to update the BIOS.
Start with a hard reset to release any excessive static on the PC:
If Windows is open, click Start and then Shutdown.
If Windows is not open and the computer has power, press and hold the power button on the computer until the computer shuts off.
With the power off, disconnect the power cord from the back of the computer.
With the power off and the power cord disconnected, press the power button on the computer for 5 seconds. The power light indicator on or near the power button might turn on briefly but then go out.
Reconnect the power cord and turn on the power.
Attempt to reset or recover the existing BIOS (if the recent update was interrupted): Click here
(restoring BIOS on notebook: http://support.hp.com/us-en/document/c02693833)
(on desktops: http://support.hp.com/us-en/document/c04126730)
Step 1: Verify the current BIOS version installed and the correct ROM Family SSID for your PC
Step 2: Find the BIOS updates
Step 3: Download and install the BIOS update
For more details: Click here
(Notebook bios update: http://support.hp.com/us-en/document/c00042629)
(Desktop bios update: http://support.hp.com/us-en/document/c00007682)
Keep us posted,
If you would like to thank us for our efforts to help you,
Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post,
Have a great day!
Didn't find what you were looking for?
Ask the community