-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Desktops
- Desktop Boot and Lockup
- HP 600 G2 Desktop Fan Running with High Speed without displa...

Create an account on the HP Community to personalize your profile and ask a question
08-23-2023 12:41 AM - edited 08-23-2023 01:12 AM
Hi Everyone, I need help from you experts.
1st phase:
I was using my pc suddenly, and the CPU system hung. Then I tried to restart it didn't restart. Then I removed the power plug and Plugged in power again; then I pressed the CPU to turn on the button. I heard the CPU beep 3 times red and 2 times white light on the power button.
2nd phase:
I opened the CPU and also completely cleaned the RAM and processor plus board, and then I checked the RAM one by one then I noticed that the first ram beeps and the second ram is fine, I installed the correct RAM in the CPU, and the CPU started running without any beeps. Unfortunately, the display still doesn't come on because when I start the CPU and press the turn-on button, the CPU fan spins normally, but after a few seconds, the fan speed is very high. It becomes more.
- The power supply fan is also running very fast with a loud noise.
🤔I don't understand what is going on. Please give me some advice.
08-23-2023 08:37 AM
@raoatiqcw wrote:Hi Everyone, I need help from you experts.
1st phase:
I was using my pc suddenly, and the CPU system hung. Then I tried to restart it didn't restart. Then I removed the power plug and Plugged in power again; then I pressed the CPU to turn on the button. I heard the CPU beep 3 times red and 2 times white light on the power button.
2nd phase:
I opened the CPU and also completely cleaned the RAM and processor plus board, and then I checked the RAM one by one then I noticed that the first ram beeps and the second ram is fine, I installed the correct RAM in the CPU, and the CPU started running without any beeps. Unfortunately, the display still doesn't come on because when I start the CPU and press the turn-on button, the CPU fan spins normally, but after a few seconds, the fan speed is very high. It becomes more.
Try reseating the ram again as described below
https://www.lifewire.com/how-to-reseat-a-desktop-memory-module-2624537
Use air duster to clean out the memory socket and rub an eraser over the memory stick gold contacts. Make sure the memory stick is securely locked in to the socket. You should not have to lift the locking tabs up.
Thank you for using HP products and posting to the community.
I am a community volunteer and do not work for HP. If you find
this post useful click the Yes button. If I helped solve your
problem please mark this as a solution so others can find it