HP Omen 30L stuck on a flickering "omen" screen after driver update, won't boot up.

[Solong757]

HP Omen 30L stuck on a flickering "omen" screen after driver update, won't boot up at all. Tried using Windows button and b to update bios but it just runs through that then gets stuck at the flickering omen screen again. Any help would be appreciated. 

The little balls at the bottom stop going round and the diamond, the "omen" and the balls just flicker forever, or until I turn it off. 

[Nirvana_95]

Hi @Solong757 

Welcome to the HP Support Community. From what I have understood, you have made driver updates and then you are not able to boot into Windows.

May I know from where did you update the drivers and which drivers you updated apart from the BIOS?

Also, could you tell me if you have made any other changes apart from the updates?

Please use the link below and follow the steps to boot into the Windows: https://support.hp.com/in-en/help/diagnostics?category=computing&issue=power-boot-issues 

Hope this helps! Keep me posted. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution. 

Click the “Yes" on the bottom right to say “Thanks” for helping. 

[Nirvana_95]

Hello @Solong757

We haven’t heard from you in a while, this post is with reference to the thread you had created with your  

friendly neighborhood (HP Support Community). 

I would like to know if the resolution we provided worked for you? If you have any other queries, feel free to reply at any time, and thank you for being a valuable member of our HP Family. 

If you would like to thank us for our efforts to help you, go to the public post & give us a virtual high-five by clicking the "Thumbs Up" icon below, followed by clicking on the "Accept as solution" on my public post. 

Have a great day ahead! 

[Nirvana_95]

Hi @Solong757 

I hope you are doing good.

We reached out but never heard back. Do you still need assistance? Let me know if there is anything else you need assistance with.

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution. 

Click the “Yes" on the bottom right to say “Thanks” for helping. 

Have a great day! 

Thanks!