Showing results for 
Search instead for 
Did you mean: 
New member
1 0 0 0
Message 1 of 2
Flag Post

HP PRO 3520 All in One Business PC - POST BOOT PROBLEM

HP Recommended
PRO 3520 All in One

Hi, I have a problem with the All in One PRO 3520.
After the start it stands on the HP logo.
Disconnecting the HDD did not help.
Bios recovery does not work (win + b).
RAM test also nothing.
Resetting C-MOS or ROM recovery does not help.
Test the motherboard itself with only the basic components to make it work - no result.
CPU i3-3240
Without dedicated VGA.


Anyone think about it?
Thank you for the ideas 🙂

Level 12
7,692 7,654 332 702
Message 2 of 2
Flag Post
HP Recommended

First:- Turn off the computer, press and hold the PWR button for 4 seconds.

Then - Leave only keyboard and mouse connected, disconnect all externally connected
devices such as Docking Station, USB storage devices, displays, and printers.
Unplug the AC adapter from the computer.

Next - Press and Hold the Power button for 15 seconds to Hard Reset.
Rinse and Repeat

NOW begin checking/testing/proving the Hardware is fit for purpose.
Power on your PC, press ESC (repeatedly), then F2 at the prompt.
Choose System Tests (Fast Test does a 4 minute hardware check).


0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation