HP Pavillion TG01-1033no BIOS Fail - Loop initial BIOS fail

[Tooper]

Download form Windows 11 update, other downloads, a BIOS for de PC.

reboot, normal instalation of BIOS. No power problems. Not failed installation.

PC re-boot in loop, and shows again BIOs Update ...with continue to strart and countdown.

Wait to countdown or click on continue to strart... re-boot again.

I have not been able to locate the BIOS file to install from a USB key.

Motherboard is Erica3 (I think 87D6 model)

I try Windows+B recovery, F10, F2... buyt not respond any type keys in boot.

[Bill_To · Accepted solution]

Hi @Tooper 

Welcome to the HP Forum.

You should be able to create a HP USB BIOS recovery drive on a different PC using sp148899.exe

Regards

[Tooper]

Thanks, it's already solved!
I was now able to load the BIOS from a USB.
He had already found the way. The problem is that in the PC search engine, you didn't have to put TG01-1033no, which is the exact model.
It was necessary to indicate TG01-1000a...that is, 1xxx models of Amd type.
There are other TG01-1000i models that I understand are Intel.
I don't understand why searching for the exact model does not lead to the correct BIOS information, and why I had to deduce this, and it is not explained anywhere.
That's why I mention it here, in case someone suffers from the same problem.