cancel
Showing results for 
Search instead for 
Did you mean: 
bigmik096
New member
3 1 0 0
Message 1 of 2
336
Flag Post

HP Z440 No POST

HP Recommended
hp z440

My computer will not POST. I thought that moving the jumpers around in Boot Block recovery mode would help, but there is still not activity. This has been giving me a headache. I thought I could just flash and update the BIOS from a USB stick, but in reality it's on the contrary. Now my computer will not give any beep code whatsoever.

Tags (1)
1 REPLY 1
bigmik096
Author
New member
3 1 0 0
Message 2 of 2
Flag Post
HP Recommended

ON another note, I was playing around with the jumpers in hope to get it to boot successfully and get BIOS, but to no avail. It would be helpful if anybody with this similar computer and motherboard "FMB-1401" model to send a pic of all the jumper pins and how they should be arranged. That may be why I'm not able to use the boot block recovery jumper, and I've also read that the USB stick that the BIOS should be on for flashing should be no more than 512MB. I currently do not have time right now to work on this, but when I do, I would like to proceed and get this desktop up and running again.

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation