cancel
turn on suggested results
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
Locked It has been a while since anyone has replied. Simply ask a new question if you would like to start the discussion again.
JonwYlie
New member
1 0 0 0
Message 1 of 2
161
Flag Post

I have replaced my graphics card and now the boot process freezes on HP splash screen

‎05-12-2020 02:19 AM

HP Recommended
Product: HPE-540me
Operating System: Microsoft Windows 10 (64-bit)

I have replaced my graphics card with a Geforce GTX 1050Ti. When I boot up, the start-up process freezes at the blue HP splash screen and won't respond to the ESC key

1 REPLY 1
TheOldMan
Level 15
Level 15
10,658 10,654 994 3,005
Message 2 of 2
Flag Post

‎05-12-2020 08:52 AM

HP Recommended

I checked on that PC spec page.  The newest BIOS is 7.15 Rev. A, which means it is a legacy BIOS vs the 8.** UEFI BIOS (which HP did not release).  The Geforce GTX 1050Ti card requires a UEFI BIOS in order for the PC to accept the card.

If you search around, you will not find a UEFI BIOS for those older PC's.

 

Long story short, you will need a newer motherboard or an older graphics card.  A GeForce GTX 660 Ti is the best you can do but you will need a 450w power supply.


I'm not an HP employee.
Did this message answer your question? Please indicate below as an Accepted Solution!
Did you find this message useful? Click on the thumbs up to give Kudos! " >.
0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".

Didn't find what you were looking for? Ask the community

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation